ZFGC

Resources => Graphics => Topic started by: SpritingBrad on July 24, 2012, 01:26:00 pm

Title: SpritingBrad´s sprites
Post by: SpritingBrad on July 24, 2012, 01:26:00 pm
here are my sprites for the moment:
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on July 24, 2012, 10:04:09 pm
I don't think this is your first time at spriting, right? And if they are, you're on a VERY good way. Personally, I like Bellumbeck.
Title: Re: Malefor´s sprites
Post by: Leduardo on July 25, 2012, 04:55:41 am
Bellum is too cool! Nice work man.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on July 25, 2012, 10:58:52 am
Thank you! i have been working on Bellumbeck for quite some time and now i know it´s worth something! :) :) :)
By the way I like your work too. ;)
Title: Re: Malefor´s sprites
Post by: SpritingBrad on July 27, 2012, 08:38:42 am
I tried to create the TP hyruletown in MC, this is what I have for now:
Title: Re: Malefor´s sprites
Post by: SpritingBrad on July 27, 2012, 04:40:11 pm
here is a better TP hyrule castle town:
Title: Re: Malefor´s sprites
Post by: Leduardo on July 27, 2012, 11:18:42 pm
Check this out!
Show content

(http://img847.imageshack.us/img847/9034/20111008233918.jpg)

(http://img195.imageshack.us/img195/9899/20111008234225.jpg)

(http://img534.imageshack.us/img534/9664/20111008234710.jpg)

(http://img97.imageshack.us/img97/4510/20111008235632.jpg)

Maybe this could help you.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on July 28, 2012, 04:36:32 pm
Thanks a lot Leduardo  :)
oh by the way here is a sprite of yeta:
(http://)
It is not quite finished yet, I still have to do the ice mass. ;)
Did you get this photos from the internet of are they yours?
Title: Re: Malefor´s sprites
Post by: SpritingBrad on July 28, 2012, 09:29:20 pm
here is an update of Yeta and Blizzeta:
I still have to do the second fase. ;)
Title: Re: Malefor´s sprites
Post by: Gonken on July 28, 2012, 09:36:47 pm
No offense, just a heads up; You can't call everything "tMC style" because you placed it next to a tMC-Link graphic or because you used a few colors from the official game. There is a lot more to the style of the game and spriting in that style isn't the easiest.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on July 29, 2012, 11:55:27 am
Ok
Title: Re: Malefor´s sprites
Post by: SpritingBrad on July 29, 2012, 06:02:35 pm
Here is the second ice mass, I just need to finnish the e statue thingy that she throws.
Title: Re: Malefor´s sprites
Post by: Leduardo on July 29, 2012, 06:08:41 pm
Yeta is a bit bigger...

Take a look to my Yeto.

(http://img256.imageshack.us/img256/8799/yetomcstyle.png)
(http://i479.photobucket.com/albums/rr153/TheSilverGriffin/Zelda%20Art/Concept%20Art/YetaandYeto.jpg)


Title: Re: Malefor´s sprites
Post by: SpritingBrad on July 29, 2012, 07:37:00 pm
I really like your Yeto, I already saw him on your topic. XD XD XD XD
Title: Re: Malefor´s sprites
Post by: SpritingBrad on July 29, 2012, 07:41:37 pm
Yeta is the right size, I checked it on the video and it was this big, here is a photo so you can see what I mean. ;)
sorry, its bad quality...
By the way, you should make the other vews of Yeto. ;)
look at the bright side, they are happy together now!! :)
Title: Re: Malefor´s sprites
Post by: SpritingBrad on July 30, 2012, 12:04:53 pm
hereis my final yeta and blizzeta sprites, enjoy.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 07, 2012, 03:27:30 pm
Sorry for not posting in a long time, my internet crashed and i couldn´t contact ZFGC.
Mean while I´ve been working on some cool sprites of the OoX Ganon in MC style.
Please note that i´m just recoloring to MC style.
(Still got some work to do)
Title: Re: Malefor´s sprites
Post by: Gonken on August 07, 2012, 04:00:21 pm
Sorry, but it is still not MC Style, and it won't magically turn into MC style if you recolor it.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 07, 2012, 04:05:22 pm
OK, but it is it close?
Title: Re: Malefor´s sprites
Post by: Gonken on August 07, 2012, 04:09:42 pm
It fits the style more than regular GB sprites at least.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 07, 2012, 04:35:11 pm
OK, i´ll try and finish it. :)
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 07, 2012, 06:37:34 pm
here is Ganon OoX nearly complete!! :D
Title: TP Town
Post by: Leduardo on August 07, 2012, 11:13:42 pm
For you or someone who wants to make Hyrule Town of TP for MC. It gave me some work putting it together, but I think it was worth it.

Show content
(http://img705.imageshack.us/img705/5521/twilightprincess.png)
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 08, 2012, 08:15:03 am
 :o (Mouthdrop)
Leduardo, you are amazing, thank you!!! XD
By the way can you help me finish it?
I´ll post my new version soon, I wasn´t satisfied with my last one...
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 08, 2012, 10:13:20 am
Here is my new remake of the TP hyrule castle town:
Title: Re: Malefor´s sprites
Post by: Leduardo on August 08, 2012, 04:56:12 pm
On the floor, try to use the textures of the MC Town.
Try to use standard textures.
A tip:
Resize the image I posted to the dimensions of the MC. After that you work with textures and buildings on top.

It is much easier to work that way.
Title: Re: Malefor´s sprites
Post by: Darklink45 on August 08, 2012, 08:24:59 pm
Nice recolors (tho I'm not very fond of them).
But I agree with Gonken, it's not really MC style, so here are some tips :)
1. Remove the shiny parts, MC sprites don't really look like they where covered in oil.
2. GB Ganon's sprite looks like it's looking directly at the screen, normal MC sprites aren't.

I added a file bellow so you can guide yourself, hope it helps.

P.S. DAMN! Leduardo that's amazing! 8)
Title: Re: Malefor´s sprites
Post by: Leduardo on August 09, 2012, 04:20:44 am
Darklink45,
Awesome!
If the forum had the option "like" the same as the faceboook I would "like" it.
Title: Re: Malefor´s sprites
Post by: thestig on August 09, 2012, 06:17:46 am
Darklink45,
Awesome!
If the forum had the option "like" the same as the faceboook I would "like" it.
Well... there is the karma system. ;p Though a separate "like" function can be considered.

That being said, I am in full agreement with Leduardo! This is just awesome possom, grade awesome! :D
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 09, 2012, 08:59:22 am
OK, Ill give it a try. ;)
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 09, 2012, 10:31:13 am
This stuff looks great! Would anyone be interested in ripping Bits of Termina for me and making it MC style? I'm currently working on a game that will require Termina as my overworld. I don't want all of it though, it'll be set centuries before MM so i have to add some originality to it and make things look newer. While some buildings in Clock town won't yet exist
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 09, 2012, 03:00:48 pm
Kienamaru, I will love to help you but I havn´t played MM of know how termina looks like... :(
If you finnish the shadow of Termina, I will surely play it. ;)
I wish nothing bad happens while your game is in progress like it happed to King Mob with TLOZ the Shadowgazer...
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 09, 2012, 03:51:23 pm
Nice recolors (tho I'm not very fond of them).
But I agree with Gonken, it's not really MC style, so here are some tips :)
1. Remove the shiny parts, MC sprites don't really look like they where covered in oil.
2. GB Ganon's sprite looks like it's looking directly at the screen, normal MC sprites aren't.

I added a file bellow so you can guide yourself, hope it helps.

P.S. DAMN! Leduardo that's amazing! 8)

I tried to do it but I couldn´t, can you finish it for me?
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 09, 2012, 11:37:13 pm
Well in that case, when I can access a computer, or when you have some time could I could look for an overhead map of Clock Town and the Deku Palace. I think quite a bit of Termina Field could be handmade while looking at the maps.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 10, 2012, 09:35:57 am
I will look for some photos too, and with your photos and my photos and someone elses´s photos who wants to help us, I will be able to do it, By the way, If its shadow of termina shld it be like in shadows?
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 10, 2012, 11:49:11 am
Nope. Shadow is referring to Dark Link.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 10, 2012, 04:30:22 pm
Oh, OK. :)
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 10, 2012, 07:09:25 pm
Should I put you down as on my development team?
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 10, 2012, 08:08:05 pm
sure. :)
BTW I started doing the Deku palace.
I´ll post it soon.
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 10, 2012, 08:57:43 pm
Oh my God thanks man! I'm gonna look for maps. I forgot the Deku Palace actually goes overhead in game.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 10, 2012, 09:26:20 pm
I have an idea for the deku, Instead of the actual deku king why not make him deku prince and make a new deku king?
I mean make him younger and make a new king like deku, Dont worry I´ll also give it a try!!
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 10, 2012, 10:10:53 pm
That's the plan. The game is centuries before MM so none of the NPC's will be the same as that game. Ikana will be the starting village which is quite lively, and Woodfall, Snowhead, and Stone Tower aren't even around yet.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 11, 2012, 02:02:12 pm
OK, One problem, my Deku palace is lost, and now I cant redo it but I asked Leduarto try and do it, meanwhile, I give to you, Young Deku prince and your majesty, the deku king!!
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 11, 2012, 07:42:39 pm
OMG, you know that Demise is ganondorf right?
well I found a picture of ganondorf from TP when he is in Smoke form and when I put it besides a picture of Demise, it !@#$ing looked the same!!
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 11, 2012, 10:21:24 pm
Ahaha, nice Ganonmise stuff. Also the Prince and King look awesome! Could you add them to the Shadow Of Termina Sprite thread?
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 12, 2012, 08:10:45 am
OK, I tryed to redo my lost work, i saved it and its lost again!!
this time ill do it and post it, who is cler, now!! hmmm computer???!!
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 12, 2012, 10:21:52 am
That sounds painful. Losing your work I mean. Is it time consuming?
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 12, 2012, 01:12:42 pm
I know, I did it for the third time and now it is here... (Hopefuly)
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 12, 2012, 08:12:00 pm
Awesome. I Think i'll have to see it next to some other stuff to be sure  it fits in though.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 12, 2012, 08:27:03 pm
can someone try and do Ganon in MC style in foudirections and moving?
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 10:33:17 am
I did Some more, and put it in an MC back ground plus added the deku king and deku king and new update young deku butler:
(Ups I put the wrong Deku king)
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 13, 2012, 11:02:14 am
That looks awesome man! I couldn't tell when it was alone but with that MC background I like it. It fits in and stands out at the same time. (It'll be amazing in the palace.)
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 11:04:57 am
Thank you, It took me a long time because of the lost work isues (I think spelt that wrong)
Im glad you liked it and that it fits the style
 XD XD XD XD XD XD XD XD XD XD XD XD
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 13, 2012, 11:09:31 am
One thing. Could you possibly extend the platform a bit? So that.. where the Deku on the sides are standing there is enough space to talk to them from the side as well.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 11:47:17 am
OK, Meanwhile, I have been working on something and finally i finnished it, I give to you, GROOSE
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 12:25:23 pm
OK I extended the platform, it looks much better  :)
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 01:57:48 pm
I found this concept art idea of ghirahim, So I´ve been thinking about the final boss of the shadow of termina, and when i saw this, i thought, maybe, the final boss could be the incarnation of ghirahim in a demonic form, have a look and tell me what you think.
Title: Re: Malefor´s sprites
Post by: Zhello on August 13, 2012, 02:24:45 pm
I found this concept art idea of ghirahim, So I´ve been thinking about the final boss of the shadow of termina, and when i saw this, i thought, maybe, the final boss could be the incarnation of ghirahim in a demonic form, have a look and tell me what you think.
Whoa that concept art is crazy nice xD, are you guys already start spriting this?  :huh:
But I think this should be like the main villain second form or something. Some Zelda villain seem normal, but ominous looking when when you get far in game, they change when you fight them. For example, Gannondorf, Vatti, and Majora's form you didn't see coming that gives the player a "wtf 0_o" reaction xD. Like for this image, when the player gets far in game, the villain will have enough of the player's meddling with his plans and turns into that for the remainder of the game, but has another form after this on. But just suggestion tho.  XD
form 1 - a toned down version of the concept art.
form 2 - the concept art
form 3 -??? monster like
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 02:30:22 pm
thaks for the idea, the only thing is if Kienamaru likes it...
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 02:32:27 pm
either way, i will still do the sprites :)
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 13, 2012, 05:36:36 pm
Just woke up from a 3 hour slumber... I'm going back to sleep...

Anyway, I think the concept looks nice but 3 things...

The pointed shoes would have to go.

Ghirahim is to Demise as Fi is to Link. A Sword can't have an incarnation.

Ghirahim has nothing to do with Termina.


Nice job on the platform by the way man. Looks better. I haven't decided if the last boss will have multiple forms. I don't really like the cliche of beat a boss and face another form. I'd prefer to do something climactic like Demise where the boss looks the same but the battle becomes more intense.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 05:43:48 pm
Ok but i have the idea of when he changes form, he turns more scary and more powerful and more demonic and evil. the battle would be even harder than before and he would have a weak point on each transformation, pretty much like Vaati.
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 13, 2012, 06:26:37 pm
just thought of something. well since you get light and dark arrows i think the last boss should change between light and dark forms. sorta like twinrova on OoA
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 06:45:36 pm
Exactly, he should change from his demonic form into light (shoot him with dark arrows then he is vulnerable)then into his normal self and then dark (Hit him with light arrows and then attack him)
I will think of his weak spot later, I will have to invent it, any ideas?
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 13, 2012, 07:50:15 pm
Why give him a weak spot when I can just make him hard to hit? The game is 2 players after all. It's gonna be Co op so arrows won't be the only way to hit him.
Title: Deku Throne
Post by: Leduardo on August 13, 2012, 08:04:59 pm
Show content
(http://majorasmask.players-guide.info/files/2011/06/Legend-of-Zelda-The-Majoras-Mask-U-snap0222.jpg)


Malefor,
I based this picture to compose Trone.
(http://img98.imageshack.us/img98/5113/dekuthrone.png)

What do you think?
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 08:13:51 pm
Ok, I have the idea of him being human like at the beggining, then when you get to the temple or castle or where he is, he transforms into a white devil (Light) whith a sword. then his second transformation would be him being bigger and stronger and darker (darkness) and have four arms with sharp claws. he attacks by trying to h you when you are close to him, and shoots darkness at you that paralises you and dark link, giving him the chance of hitting you. he has a hole that has a heart that you have to hit, but would be difficult to hit him. his horn turn red or blue when he is going to shoot fire or ice. What do you think?
 

P.S Leduardo this is awsome
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 13, 2012, 08:16:12 pm
leduardo, now that Ive seen your throne it would be nice if you keep doing the deku palace. ;)
please do it for me...
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 14, 2012, 01:12:49 am
That throne... wow.

Hmm i don't like the devil idea. Why not make him bad but not look it?
Title: Re: Deku Throne
Post by: Kren on August 14, 2012, 02:10:33 am
Show content
(http://majorasmask.players-guide.info/files/2011/06/Legend-of-Zelda-The-Majoras-Mask-U-snap0222.jpg)


Malefor,
I based this picture to compose Trone.
(http://img98.imageshack.us/img98/5113/dekuthrone.png)

What do you think?
you have some readability issues in the chair it gets confused with the wood tiles.
Title: Re: Malefor´s sprites
Post by: Leduardo on August 14, 2012, 03:02:15 am
Yes, I agree.
 I think I'll replace the floor, but only tomorrow.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 14, 2012, 12:22:35 pm
Kienamaru, I have the sprites of the ´Shadow Demon Darkus´ (invented the name) I thought about him being human like and when he you get into his domain he transforms into a demon. I just did a few basic sprites if you like it ill keep doing it and make ti better. i had an idea of dark links origin: ´Darkus, the Shadow demand lord of the undreworld, created dark link in order to take control of termina, but his creation turned against him. (aparently he didnt like being bossed around)´
What do you think about the origin of dark link? I think its a little funny.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 14, 2012, 12:38:14 pm
I´m going to try something new, from the first zelda game that I played, I am going to do the ghost ship of Phantom hourglass!!
Title: Re: Malefor´s sprites
Post by: Zhello on August 14, 2012, 02:08:58 pm
Kienamaru, I have the sprites of the ´Shadow Demon Darkus´ (invented the name) I thought about him being human like and when he you get into his domain he transforms into a demon. I just did a few basic sprites if you like it ill keep doing it and make ti better. i had an idea of dark links origin: ´Darkus, the Shadow demand lord of the undreworld, created dark link in order to take control of termina, but his creation turned against him. (aparently he didnt like being bossed around)´
What do you think about the origin of dark link? I think its a little funny.

The red spot his weak point? You should make a sprite version of his second form being injury, mening he player has a chance to attack him, but when the red spot goes away, he is on attack mode again, or is hisweak spot always visble.  For like what Kienamaru about the co-op mode. Make red spot only atatckable to player 1 and make a blue spot for player 2, if the player is to it the wrong weak some, they get damaged and the color of the spot change.  I dunno, seeing the sprites gives that idea :D but you can agree/disagree with this random idea.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 14, 2012, 02:38:39 pm
I like the idea, ill try and do it, also do you want to see the ghost ship? its nearly done.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 14, 2012, 03:57:49 pm
I hed a better idea of the fina battle: he has two weak spots a blue one and a red one, but you can only hit one at a time depending on which color his horns turn into blue or red. He attacks with his sharp claws trying to stop link from hitting him, also when his horns turn red or blue, he shoots fire when its red and ice when its blue. To hit him with no problem you just have to hit him with light arrows when his horns are red or blue. When he dies he turns into a giant explosion of purple smoke.
What do you think?

Title: Re: Malefor´s sprites
Post by: Kienamaru on August 14, 2012, 08:54:10 pm
I like a mix of Linkwolf's and your idea. The whole thing about 2 separate weak points being hittable only by Link (red) or Dark Link (Blue). How about this.

After you hit his weak point (each one) he gets stunned and you have to shoot him with a light arrow if (while stunned his weakpoints glow Purple) or a dark arrow if (while stunned they glow Yellow.) That way it can alternate between which arrows you use AND which people can attack him.

As for the Sprite, I like them both but I don't think they should be the same person. I also strongly disagree with the name Darkus. Try something that isn't as apparent to what he does.

About the idea of Dark Link's origins... Actually Dark Link is the Link of Termina. Did you ever read the plot to Shadow of Termina? Link was accidently warped into Termina by a magical stone he touched in the woods.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 15, 2012, 08:11:21 am
I did read it but i forgot about that part.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 15, 2012, 10:11:18 am
a few sprites on this post, I give to you:
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 15, 2012, 04:41:22 pm
Hmm Malefor do you think you could make A person who looks somewhat like Oni Link but is wearing a different outfit and has longer hair?
Title: Re: Malefor´s sprites
Post by: Leduardo on August 15, 2012, 05:41:48 pm
The Ghost Ship was nice, but the skull of the bow of the ghost ship is bigger.
 Some pictures to help:

Show content

(http://www.mangarush.com/files/mangas/legend-of-zelda-phantom-hourglass-the/2/2.jpg)

(http://img.youtube.com/vi/JE-8EI89R1k/0.jpg)

(http://www.zeldainformer.com/assets_c/2011/01/displacement_img_1-thumb-425x249-3091.jpg)

(http://www.glitterberri.com/content/zelda_series/hyrule_historia/concept_art/ph_scene_2.jpg)

Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 15, 2012, 06:25:56 pm
Hmm Malefor do you think you could make A person who looks somewhat like Oni Link but is wearing a different outfit and has longer hair?
Ill try is he like a boss or something?
Title: Re: Malefor´s sprites
Post by: Leduardo on August 15, 2012, 06:58:08 pm
Take a look:

http://www.youtube.com/watch?v=qbehNYG9wws
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 15, 2012, 07:22:26 pm
Hmm Malefor do you think you could make A person who looks somewhat like Oni Link but is wearing a different outfit and has longer hair?
Ill try is he like a boss or something?

Yeah he is. The original Fierce Deity.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 15, 2012, 07:26:24 pm
OK,here is my try
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 15, 2012, 08:50:03 pm
Change up the bangs a bit, make the back a little longer, and not curl at the end. Remove the piece that sticks up. Make him a bit taller. He's supposed to be an adult. Also, give him lightly tanned skin.

(Reason for so much detail on the hair is because Link won't wear a hat in this game. So they shouldn't look so similar.)
Title: Deku Throne 2
Post by: Leduardo on August 15, 2012, 09:04:33 pm
(http://img9.imageshack.us/img9/69/dekuthrone2.png)
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 15, 2012, 09:18:15 pm
version 2 looks powerful!
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on August 16, 2012, 01:38:29 am
Hmm Malefor do you think you could make A person who looks somewhat like Oni Link but is wearing a different outfit and has longer hair?
Ill try is he like a boss or something?

Yeah he is. The original Fierce Deity.

Do you mind if I give it a try, too?
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 16, 2012, 04:56:22 am
Hmm Malefor do you think you could make A person who looks somewhat like Oni Link but is wearing a different outfit and has longer hair?
Ill try is he like a boss or something?

Yeah he is. The original Fierce Deity.

Do you mind if I give it a try, too?

Go for it!
Title: Re: Deku Throne 2
Post by: SpritingBrad on August 16, 2012, 07:44:27 am
(http://img9.imageshack.us/img9/69/dekuthrone2.png)
simply amazing.

Hmm Malefor do you think you could make A person who looks somewhat like Oni Link but is wearing a different outfit and has longer hair?
Ill try is he like a boss or something?

Yeah he is. The original Fierce Deity.

Do you mind if I give it a try, too?

Go for it!

I will y too, I didnt know you wanted him like that, and neither that link doesnt wear a cap.
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 16, 2012, 08:42:08 am
Sorry I hadn't gotten to talking about Link. But he won't wear a hat because his extra 2 tunics. (Smoke Gray and Shadow Black) are going to have Hoods. Short sleeves and hoods is a win. I don't know how he'd look hooded though.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 16, 2012, 09:59:35 am
Ill give it a try, i have zelda on disguise (which simply a hood and a tunis jus have to take zelda out and recolour it and put it on link)
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 16, 2012, 10:02:23 am
Hmm alright. I'll look at it when I can. It's 5 Am here so i'll be going to sleep really soon.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 16, 2012, 02:58:58 pm
i finished the final boss of your game, kienamaru. and also changed the name to Vator.
tell me what you think
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 16, 2012, 03:20:53 pm
The Ghost Ship was nice, but the skull of the bow of the ghost ship is bigger.
 Some pictures to help:

Show content

(http://www.mangarush.com/files/mangas/legend-of-zelda-phantom-hourglass-the/2/2.jpg)

(http://img.youtube.com/vi/JE-8EI89R1k/0.jpg)

(http://www.zeldainformer.com/assets_c/2011/01/displacement_img_1-thumb-425x249-3091.jpg)

(http://www.glitterberri.com/content/zelda_series/hyrule_historia/concept_art/ph_scene_2.jpg)


here it is.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 16, 2012, 03:35:08 pm
Fierce deity!!!
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 16, 2012, 08:55:42 pm
for someone who wts to edit to Mc style:
Clock town in OOX style, (its not mine)
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 16, 2012, 11:55:29 pm
new Feirce Deity looks awesome! I'd just like for his skin to be a bit darker.

Vator looks cool too. I like his hands, but maybe you have to fight him differently. I really like the cycle between Dark and Light. So maybe when he has the dark hands around him you have to use Light Arrows to destroy them. Once they're gone You can hit him with Dark Link. Then he switches and calls up Light Hands that must be hit by Dark Arrows and then allowing Link to slash him.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 17, 2012, 09:40:28 am
nice 8) ill give it a try.
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 17, 2012, 09:50:33 am
for someone who wts to edit to Mc style:
Clock town in OOX style, (its not mine)


Editing that into MC style would be a sick birthday present if someone is capable.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 17, 2012, 10:02:52 am
ok, I found this on www.hyrulehistoria.com, maybe we can do the majana tribe from this.
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 17, 2012, 11:44:01 am
Actually the Majana were going to be humans. (Terminan Hylians) [Terminans]
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 17, 2012, 12:19:56 pm
OK, but i thought they could be a little different from the terminans.
like the twili of termina sort of thing
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 17, 2012, 01:16:50 pm
If they were, I can't say if it would make sense. They're supposed to be like the Gerudo of Termina. (I don't consider the Pirates counting.) They live in the desert region but unlike the Gerudo they're indian like, and use primitive weapons and clothing.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 17, 2012, 01:18:36 pm
Ok, For vator, i thought that when he throws the hands at you thats when you have to hit the hands, hit them one by one, strangely the light hands follow dark link and dark hadns follow link, making them more dificult to hit.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 17, 2012, 02:24:58 pm
Vator Update:
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 17, 2012, 05:54:41 pm
Vator Update:

That's excellent.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 17, 2012, 06:33:47 pm
thank you
 :)
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 17, 2012, 06:58:15 pm
for someone who wants to make clock town in MC:
http://zfgc.com/forum/index.php?topic=36229.20
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 18, 2012, 09:02:51 am
I tryed link with tunics, here is my try:
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 18, 2012, 03:47:34 pm
kienamaru, i tried one of your bosses, skyvernac, here is my try, tell me what you think
Title: Re: Malefor´s sprites
Post by: Kami on August 18, 2012, 04:06:35 pm
That looks like an edited dragon and wyvern from RPGMaker XP.
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on August 18, 2012, 04:17:37 pm
That looks like an edited dragon and wyvern from RPGMaker XP.

Yup
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 18, 2012, 04:26:35 pm
it was too dificult to make a dragon in Mc so i started looking on google to see if i could edit one into MC and found this, it stil looks cool though.
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on August 18, 2012, 04:54:16 pm
it was too dificult to make a dragon in Mc so i started looking on google to see if i could edit one into MC and found this, it stil looks cool though.

Yeah, well, it may look cool, and fit in the MC style because of the colors, but not the design. You could try using the dragon boss of MC (i don't remember his name)
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 18, 2012, 06:32:35 pm
Gleerok?
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on August 18, 2012, 06:41:59 pm
Gleerok?

Yeah, that one. You can use its head as a beginning.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 18, 2012, 06:43:49 pm
can you help me?
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on August 18, 2012, 07:06:58 pm
can you help me?

I'm kind of busy now.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 18, 2012, 07:51:46 pm
OK
Title: Re: Malefor´s sprites
Post by: Kienamaru on August 18, 2012, 09:01:02 pm
Unsure about the Skyvernac. Not only was he a Wyvern so he has shorter arms because he mostly flies. butI haven't decided how you'll fight him yet. I know it wasn't going to be with the Ice Rod.

About the tunics.

Whaaat? That's strange looking. He looks to be in a full fledged robe for some reason, then he has the scarf over his mouth? Let me better explain the outfit.

1.Take Minus Cap Link before he gets a hat.
2. Make the Tunic Dark Gray instead of Green.
3. Put a hood on it.
4. If possible, make it short sleeved.

NO SCARF, his face is supposed to show. For the other Tunic his Tunic is black and his pants and sleeves are gray.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 19, 2012, 09:07:44 am
Ok, I´ll try.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 19, 2012, 01:06:20 pm
can someone try and do ganon in Mc style four directions and moving?
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 26, 2012, 06:04:07 pm
wow, this topic has been forgoten has it. Well i did a darth vader sprites in MC, enjoy.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on August 30, 2012, 11:51:54 am
heri bring to you from the original zelda I, Ganon in MC style
Title: Re: Malefor´s sprites
Post by: SpritingBrad on September 10, 2012, 06:27:59 pm
no one is responding, well I think i´ll put this here:
Title: Re: Malefor´s sprites
Post by: Kienamaru on September 11, 2012, 01:47:50 pm
Ordona looks awesome!
Title: Re: Malefor´s sprites
Post by: SpritingBrad on September 11, 2012, 04:44:34 pm
thank you!!
Title: Re: Malefor´s sprites
Post by: NaviSaysHEY on September 11, 2012, 10:03:20 pm
Nicely done sprites!
It would be a cool idea to have link wield nunchucks.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on September 12, 2012, 03:48:53 pm
Awsome
Title: Stagnox, Armored Colossus
Post by: SpritingBrad on December 05, 2012, 09:41:31 pm
I´m going to re-open this topic scince it has been forgotten.
As Leduardo has been doing Cragma, I got inspired to do another boss of ST: Stagnox, Armored Colossus.
Title: Re: Malefor´s sprites
Post by: Leduardo on December 06, 2012, 01:13:52 am
Liked it!
Will you do others animations?
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 06, 2012, 08:16:10 am
Maybe, But before I´m going to try the octopus like boss in ST also
Title: Phytops, Barbed Menace
Post by: SpritingBrad on December 06, 2012, 06:52:44 pm
Here is Phytops, Barbed Menace:
I´m also going to try: Frazz, Master of Icy Fire.
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on December 06, 2012, 07:00:30 pm
It feels weird. The shading on his head looks too... well, don't know how to say it. Try to make that it doesn't look much like a line.

EDIT: I looked at it again, and the shading on all the sprite looks weird.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 06, 2012, 07:10:34 pm
which one are you talking about, Stagnox or Phytops?
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on December 06, 2012, 07:15:56 pm
Stagnox could be fixed some things, but Phytops is in which is most noticed.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 06, 2012, 07:25:41 pm
and by a "Line" you mean by the line on the bottom of the head?
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on December 06, 2012, 07:28:15 pm
and by a "Line" you mean by the line on the bottom of the head?

So basically, the shading looks too linear. The object on the head looks more like a rounded object. I think what Blaze is trying to say is that the shading looks too linear for a rounded object. For instance, when you shade something circular, you should be curving the line along with the curve of the object.

Here's a reference of what I mean:

(http://www.discover-how-to-draw.com/images/3d-shading-7.jpg)

Notice how the shades are not linear?
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 06, 2012, 08:29:01 pm
I see what you mean but i´m too tired of this character to do it.
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on December 06, 2012, 08:37:39 pm
I see what you mean but i´m too tired of this character to do it.

Well...to be a little frank, if you want to keep spriting or being an artist, that's kind of what you'll be expected to do: make tweaks. I mean, I get you, making tweaks kinda really sucks especially if you want to move on to another character. I submit art for the community project and get unnecessary tweak comments all the time. However, when one actually *is* necessary and is done...then it makes a huge difference. The quality of your work will improve by tweaking it.

It's up to you in the end, no pressure lol. If you're too tired to work on it again, then simply don't fix it. You're in control of your work here.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 06, 2012, 08:51:48 pm
I see what you mean but i´m too tired of this character to do it.

Well...to be a little frank, if you want to keep spriting or being an artist, that's kind of what you'll be expected to do: make tweaks. I mean, I get you, making tweaks kinda really sucks especially if you want to move on to another character. I submit art for the community project and get unnecessary tweak comments all the time. However, when one actually *is* necessary and is done...then it makes a huge difference. The quality of your work will improve by tweaking it.

It's up to you in the end, no pressure lol. If you're too tired to work on it again, then simply don't fix it. You're in control of your work here.
i´ll see what I can do then
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 07, 2012, 09:22:39 am
I redid the thing of the head:
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on December 07, 2012, 12:49:26 pm
It still looks very linear. The color change is too big. It's impossible to notice that the head balls have shading.
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on December 07, 2012, 12:52:28 pm
It still looks very linear. The color change is too big. It's impossible to notice that the head balls have shading.

What? The new one looks pretty good to me...he changed the head balls to actual balls and you can tell they're shaded. I don't know if my monitor's got different settings but it's pretty noticeable that Malefor made a good effort. I think this is a good improvement.
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on December 07, 2012, 12:59:19 pm
Yes, yes, I forgot to say that in comparison with the old one, the new one is a big change. However, my point is that on the balls, whe have a dark violet, and then directly a light pink. What I would say is to fix that having another color.
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on December 07, 2012, 02:14:33 pm
Yes, yes, I forgot to say that in comparison with the old one, the new one is a big change. However, my point is that on the balls, whe have a dark violet, and then directly a light pink. What I would say is to fix that having another color.

Maybe, but personally I find the shading fine. It's noticeable enough.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 07, 2012, 02:40:54 pm
Yes, yes, I forgot to say that in comparison with the old one, the new one is a big change. However, my point is that on the balls, whe have a dark violet, and then directly a light pink. What I would say is to fix that having another color.

Maybe, but personally I find the shading fine. It's noticeable enough.

thanks 酒用Star. what do you think of the tentacles? should I change anything?
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on December 07, 2012, 03:13:07 pm
Well, I find the lighting to be a little awkward to be honest. If you look at the part with the dude's head with the tentacles together, the lighting is coming from a few areas and not really making sense. It looks sort of like you shaded everything separately without really thinking of the global lighting and just sticking it together. I think if you really wanted to make a sprite with the tentacles and the head together, I would maybe consider looking at the lighting to see if it makes sense. Still, the technique of shading looks fine on the tentacles; just together it looks awkward.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 07, 2012, 04:12:04 pm
yes but remember he is going to be in water so you wouldn´t notice it that much.
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on December 07, 2012, 04:33:54 pm
Eeeehhhhhh that's not really true. Actually, I think lighting underwater is even more difficult to make look good. Take a look at this:

(http://www.packtpub.com/sites/default/files/Article-Images/underwater-img01X.png)

The light comes from above the surface and radiates down. Equally, there are ripples that reflect down too. It's not a HUGE deal, but you'd have to take this into effect. Lighting is very important and can make your drawings go from really crappy to REALLY GOOD (I'm not saying your sprites are crappy, they're actually quite good. It's just, people like me will notice this). Seriously, I can show you the steps to my drawings some time and you'll see how much good lighting makes a difference.
Title: Re: Malefor´s sprites
Post by: Gonken on December 07, 2012, 04:35:31 pm
You put tMC Link next to it, so why not look the shading and antialiasing of his sprite and do that with your sprite?  You might also want to use some other sprites for reference because the tMC player(Link) sprite has a specific coloring(also, full black outline) because of it being the main focal point.

You might also want to look up some pixelart guides. I'm sure there are a few of them on the internet. I haven't read any but if I find one I'll let you see it.
Your sprites are lacking anti-aliasing and that little bit extra to atleast fit in decently with tMC sprites, gradient shading probably isn't the best way to shade the tentacles, but that's not my decision.

A good tip is to start with smaller sprites, but don't limit yourself too much. Good luck!
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 07, 2012, 05:19:34 pm
ok thanks for the tips :)
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on December 07, 2012, 05:27:48 pm
From our friend, Shadow, here we have a guide:

http://www.pixeljoint.com/forum/forum_posts.asp?TID=11299 (http://www.pixeljoint.com/forum/forum_posts.asp?TID=11299)
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 07, 2012, 05:31:05 pm
thank a lot blaze!!! XD XD
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 07, 2012, 06:14:56 pm
Your sprites are lacking anti-aliasing and that little bit extra to atleast fit in decently with tMC sprites, gradient shading probably isn't the best way to shade the tentacles, but that's not my decision.

The tentacles had actually Gradient Shading in the actual game. See in the attachment bellow
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on December 07, 2012, 06:53:06 pm
Ah! I see where you got the strange shading from. In that screenshot it actually makes some sense, because you see its environment.
Title: Re: Malefor´s sprites
Post by: Gonken on December 07, 2012, 06:55:36 pm
Yes, but the shading doesn't work the same way here. In your pic, Link has some shades on his cap because of the shadow, but you don't render those in pixelart, and he doesn't in the Link sprite you presented on your sheet. :)

As for the tentacles, if you can make it look good with gradient then I guess it works. But don't be afraid to try other techniques too.
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on December 07, 2012, 06:58:36 pm
Yes, but the shading doesn't work the same way here. In your pic, Link has some shades on his cap because of the shadow, but you don't render those in pixelart, and he doesn't in the Link sprite you presented on your sheet. :)

As for the tentacles, if you can make it look good with gradient then I guess it works. But don't be afraid to try other techniques too.

Well, to be honest, I agree except it's hard without seeing the scene. What if the Link in the sheet has nothing to do with the boss? Maybe it's just there for height reference or something? We can't really tell without the scene, but you do bring up an excellent point.
Title: Frazz, Master Of Icy Fire
Post by: SpritingBrad on December 07, 2012, 07:33:26 pm
Yes, but the shading doesn't work the same way here. In your pic, Link has some shades on his cap because of the shadow, but you don't render those in pixelart, and he doesn't in the Link sprite you presented on your sheet. :)

As for the tentacles, if you can make it look good with gradient then I guess it works. But don't be afraid to try other techniques too.

Well, to be honest, I agree except it's hard without seeing the scene. What if the Link in the sheet has nothing to do with the boss? Maybe it's just there for height reference or something? We can't really tell without the scene, but you do bring up an excellent point.

it is actually there for height.
here is Frazz, Master of Icy Fire
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on December 07, 2012, 09:12:31 pm
Frazz looks pretty good. I'm not the best at judging sprites but this one's pretty small so it's hard to see if there are many flaws.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 07, 2012, 09:25:29 pm
Well thats his actual size in MC style. ;)
Nex post i do will be part 2 of Frazz. (Him inhailing in air)
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on December 07, 2012, 10:07:31 pm
It lacks the black outline that MC sprites have.
Title: Re: Malefor´s sprites
Post by: Gonken on December 08, 2012, 12:10:35 am
What if the Link in the sheet has nothing to do with the boss? Maybe it's just there for height reference or something?
Sure, the sprite itself doesn't have to do anything with the boss. But I guess he is trying to do it in the style of tMC? Therefore he can use the sprite he put there for some help, even if it was mainly just there for height.


it is actually there for height.
^The above, and: why not use a character of another style that matches better if you are not aiming for tMC style.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 08, 2012, 10:25:23 pm
Frazz, Giant Balloon!!
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 13, 2012, 04:48:40 pm
Leduardo PMd me and helped to redo the head of Phytops.
Give credit to me and specialy Leduardo.
Title: Re: Malefor´s sprites
Post by: NaviSaysHEY on December 13, 2012, 10:38:09 pm
Wow! The sprites are great! Good job! Do you plan on using them for anything
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 14, 2012, 06:52:49 am
Nope, you see, i do sprites for fun basically, and if someone wants to use them, go ahead, just of course give credit ;)
For example, Leduardo is doing sprites of every game of zelda into MC stile, but he is not doing a game, jet.
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on December 14, 2012, 12:33:55 pm
Nope, you see, i do sprites for fun basically, and if someone wants to use them, go ahead, just of course give credit ;)
For example, Leduardo is doing sprites of every game of zelda into MC stile, but he is not doing a game, jet.

Jet is the plane, bro. Yet is for time  ;).

However, your sprite lacks the black outline.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 17, 2012, 11:17:53 am
OK I´ll add the outline when i can ;)
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 17, 2012, 11:47:06 am
here is the outline.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 20, 2012, 03:53:30 pm
I did deku link for a game that NavySaysHey is doing, he told me to sprite him so i did.
give credits to the people mentioned if used.
Title: Re: Malefor´s sprites
Post by: NaviSaysHEY on December 22, 2012, 04:32:08 pm
 :huh:
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 22, 2012, 04:42:17 pm
:huh:
my sprite is still waiting approval? what is going on? this is for NavySaysHey!!
Title: Re: Malefor´s sprites
Post by: spectrumbranch on December 22, 2012, 08:19:12 pm
:huh:
my sprite is still waiting approval? what is going on? this is for NavySaysHey!!

Don't worry, they're probably just doing a lengthy copyright check.
Title: Re: Malefor´s sprites
Post by: thestig on December 22, 2012, 08:20:38 pm
:huh:
my sprite is still waiting approval? what is going on? this is for NavySaysHey!!
Its the warning system doing its job. They've set your warning level high enough to be "moderated", so they track all of your posts and certain things you need approval for. Give the moderators time to approve the content. Or, you can alternatively send them a private message to review your submission.
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on December 22, 2012, 08:33:52 pm
Honestly, I don't approve before somebody else sees it. Usually it's gm112 or Blaze or Steve who calls out on the copyright stuff. I don't have enough experience in the field to properly detect if something's a ripoff or not. I like to have a second opinion.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 22, 2012, 09:17:40 pm
Soooo, do you like it Navy?
Title: Re: Malefor´s sprites
Post by: Sinkin on December 23, 2012, 01:06:22 am
Leduardo PMd me and helped to redo the head of Phytops.
Give credit to me and specialy Leduardo.
It's a good start, though, the sprite is missing depth, more saturated colors, AA and better shading. I did a quick edit on it so you get the point, I hope it helps!
Title: Re: Malefor´s sprites
Post by: Leduardo on December 23, 2012, 03:22:50 am

(http://zfgc.com/forum/index.php?action=dlattach;topic=39863.0;attach=11984;image)
I loved the version of Sinkin, especially the eyes and cheek.
I think it's missing the detail of swirl on cheek yet.
The darkening of the colors on the sides gave a good sense of depth.
I also believe that the shadows of the bubbles could be all pink as the three bubbles at the top of the head.
Malefor could have also edited the tentacles with thorns which I referred.
Could be made as some animations like the vídeo:

http://www.youtube.com/watch?v=3OkQGBA3R6g

(http://t1.gstatic.com/images?q=tbn:ANd9GcTOTqvZ9RopnVuXdLhmxskzvTPtO6SVN1TtTbmWuWEWvVL7MGgD0J8w5T2IpQ)
Title: Re: Malefor´s sprites
Post by: Sinkin on December 23, 2012, 08:22:22 am
Yeah, I missed the swirls, but I just wanted to point out the important things that was missing haha. I believe that the pink blobs on the head can be done better, like they are now, it's quite hard to find a nice way to shade it. I'll see if there is a better way to make 'em as soon as I get up from bed lol :P
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 23, 2012, 09:13:52 am
Sinkin, I love the new version, but as leduardo said, it still needs the swirls on the cheeks, maybe I can fuse the swirls on the cheeks into your sprite later and see how it looks like.
EDIT: the  tentacles i did in the original sprite where made form the video, i print screened it for like 15 frames when the tentacles moved and then overcoated the tentacle with MC colours. Thats how I got that smooth movement on it, but the shading on it doesn't look right to me. Does anyone agree?
EDIT 2: I posted Sinkin´s version on the attackment bellow with the swirls that leduardo did on his version:
Title: Re: Malefor´s sprites
Post by: Sinkin on December 23, 2012, 06:09:01 pm
This is the final edit from me, fixed the blobs and the swirls. I hope you get the point of my edits, Malefor.
Title: Re: Malefor´s sprites
Post by: NaviSaysHEY on December 23, 2012, 07:21:23 pm
I like the phytops sprite! Looks creepy in the water.
Thank very much for the deku link sprite with the pipes Malefor!! XD
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 23, 2012, 10:13:01 pm
This is the final edit from me, fixed the blobs and the swirls. I hope you get the point of my edits, Malefor.
I loved it, what do you think of the tentacles, can you fix something of them?
I like the phytops sprite! Looks creepy in the water.
Thank very much for the deku link sprite with the pipes Malefor!! XD
Wait I have delu link flying too, i'll post him tomorow maybe... -yawn-
Title: Re: Malefor´s sprites
Post by: Gonken on December 24, 2012, 02:26:41 am
(http://i.imgur.com/ZrcjF.png)

Uh, did some changes to it, and ended up with two different versions.
Also; improved palette, and changed some colors to my likings.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 24, 2012, 09:33:49 am
(http://i.imgur.com/ZrcjF.png)

Uh, did some changes to it, and ended up with two different versions.
Also; improved palette, and changed some colors to my likings.

 :o I nearly cried when i saw that, THANK YOU A LOT!!
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 24, 2012, 10:33:13 am
could you also try and do the blobs on top of the eyes and them braking?
Title: Re: Malefor´s sprites
Post by: Sinkin on December 24, 2012, 10:47:53 am
(http://i.imgur.com/ZrcjF.png)

Uh, did some changes to it, and ended up with two different versions.
Also; improved palette, and changed some colors to my likings.
Ser bra ut, Gonken ;)
Bra val av färg, men jag tycker att det blev lite för rörigt runt om vid ögat med två helt olika färger, munnen var även lite svår att läsa av. Fixade till lite smått om det uppskattas! Förresten, gör ingen hel sprite åt just honom, tanken bakom att jag gör sjabbiga edits är för att han ska få ett hum om hur man gör, lägg inte ner för mycket tid åt honom. Vi moderatorer håller ett öga på honom just för att han är bra på att sno sprites och ta cred för det :P

Looks good, Gonken ;)
Good palette, but I think it got a bit too messy around the eye with two different colors, the mouth was also a bit hard to read. Just fixed some minor things on it!
Title: Re: Malefor´s sprites
Post by: SpritingBrad on December 24, 2012, 01:48:51 pm
thank you all for all your help, I will post the new version with the new tentacles I tried soon.
Credit will be given to all of you. :)
Title: Re: Malefor´s sprites
Post by: Gonken on December 24, 2012, 04:19:55 pm
(http://i.imgur.com/ZrcjF.png)

Uh, did some changes to it, and ended up with two different versions.
Also; improved palette, and changed some colors to my likings.
Ser bra ut, Gonken ;)
Bra val av färg, men jag tycker att det blev lite för rörigt runt om vid ögat med två helt olika färger, munnen var även lite svår att läsa av. Fixade till lite smått om det uppskattas! Förresten, gör ingen hel sprite åt just honom, tanken bakom att jag gör sjabbiga edits är för att han ska få ett hum om hur man gör, lägg inte ner för mycket tid åt honom. Vi moderatorer håller ett öga på honom just för att han är bra på att sno sprites och ta cred för det :P

Looks good, Gonken ;)
Good palette, but I think it got a bit too messy around the eye with two different colors, the mouth was also a bit hard to read. Just fixed some minor things on it!

Still prefer my version.
However, I only did this for fun, while bored.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on January 06, 2013, 04:59:41 pm
I went to the forest and found this guy, he was wearing a black suit with a red tie. he was pale as plain paper and he had no face!
his name, was...
...SLENDERMAN
Well enough of that and I´ll leave you my sprite attempt of HIM...
Title: Re: Malefor´s sprites
Post by: Whitay on January 06, 2013, 09:10:09 pm
The tentacles could probably use some more detail to match the body, but other then that the sprite looks good to me, although sticking true to slenderman his body isnt proportained right, as in very long legs and such. but the detail and how the sprite looks is very good!
Title: Re: Malefor´s sprites
Post by: BlazeBigBang on January 06, 2013, 09:18:03 pm
Slenderman is much taller.
Title: Re: Malefor´s sprites
Post by: Starforsaken101 on January 06, 2013, 09:54:32 pm
Blaze has a good point: Slenderman is pretty tall. Equally, his arms are really, really long and not proportional. The tentacles look strange. The body also looks differentish in each tentacle shot.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on January 06, 2013, 10:19:35 pm
The tentacles could probably use some more detail to match the body, but other then that the sprite looks good to me, although sticking true to slenderman his body isnt proportained right, as in very long legs and such. but the detail and how the sprite looks is very good!
thanks, i´m glad you liked it XD
Slenderman is much taller.
I know, I´ll make him taller, after the slenderman, I´ll post my attempt of the Minecraft Enderman in MC style.
Blaze has a good point: Slenderman is pretty tall. Equally, his arms are really, really long and not proportional. The tentacles look strange. The body also looks differentish in each tentacle shot.
Like I said above, I´ll make him taller, plus I´ll make the tentacles more MCish.

Anything else? what about the transporting sprite? is it OK?
Title: Re: Malefor´s sprites
Post by: Whitay on January 07, 2013, 12:16:42 am
Also make the arms maybe skinnyer but longer atleast. Also wouldnt it have the tentacles? Or no? But it looks good to me
Title: Re: Malefor´s sprites
Post by: SpritingBrad on January 07, 2013, 10:33:57 am
Yes i'll try, it would be awsome to have to fight slenderman as one miniboss or something in the lost woods XD
Title: Moldarach MC style
Post by: SpritingBrad on January 07, 2013, 07:38:17 pm
While I was working on the Slenderman sprite I got the idea of making the sprite of Moldarach, so I did.
It turned out pretty good. Give me your opinion.
Slenderman coming up!
Title: Re: Malefor´s sprites
Post by: Whitay on January 07, 2013, 11:27:17 pm
To me it doesnt look right, it feels like its missing the back half of his body, and the arms look off. They need to be small and not triangularish.. But other then that its a great start, as the shading, color, and the claws look really nice. Although from a coding standpoint how would this be faught without motion controls? Well thats a game makers choice xD
Title: Re: Malefor´s sprites
Post by: SpritingBrad on January 08, 2013, 06:28:11 pm
To me it doesnt look right, it feels like its missing the back half of his body, and the arms look off. They need to be small and not triangularish.. But other then that its a great start, as the shading, color, and the claws look really nice. Although from a coding standpoint how would this be faught without motion controls? Well thats a game makers choice xD


Yeah, so listen, for now on i will only be conected the weekends because i got banned of the computer because of being like lots of hours on it so just keep it in mind
Title: Re: Malefor´s sprites
Post by: SpritingBrad on February 09, 2013, 07:38:39 pm
I bring to you slender´s family:
Title: Re: Malefor´s sprites
Post by: Kami on February 09, 2013, 07:39:49 pm
I'm going to be honest, this needs some work,
Some issues I've found:
The arms have alot of jaggies, The enderman's head is kinda deformed.There are also some jaggies in the enderman's body. Splendorman's hat is kinda blocky. I also see jaggies on all of their heads. Color choice needs a bit more contrast. Their feet look like blobs.
Title: Re: Malefor´s sprites
Post by: SpritingBrad on February 10, 2013, 09:23:05 am
Ok i'll try to fix it
Title: Re: Malefor´s sprites
Post by: SpritingBrad on February 16, 2013, 05:26:42 pm
here he is
Title: Ganon OoX MC style
Post by: SpritingBrad on June 01, 2014, 05:36:41 pm
Im back!!! :D
I bring to you a new and improved Ganon OoX MC Style. Enjoy
Title: Re: Malefor´s sprites
Post by: SpritingBrad on June 05, 2014, 05:01:03 pm
Finally I put this together: Phytops, bared menace MC style
Give credit to those listed if used.
Title: Re: Malefor´s sprites
Post by: Leduardo on June 05, 2014, 07:33:00 pm
Nice, man.

You could do some tentacles being thrown to Link, or you are thinking about another type of boss attack?
You could use the red color for spine too.

http://www.youtube.com/watch?v=3OkQGBA3R6g
Title: Re: Malefor´s sprites
Post by: SpritingBrad on June 06, 2014, 06:49:07 am
Nice, man.

You could do some tentacles being thrown to Link, or you are thinking about another type of boss attack?
You could use the red color for spine too.

http://www.youtube.com/watch?v=3OkQGBA3R6g

I will try to do those tubes that come out of the head and spit out goo and then the tentacles. It is nice to be back! :D
Title: Phytops update
Post by: SpritingBrad on June 06, 2014, 09:27:09 am
Here is an update.
Tentacle spikes now are redish and tube animation.
Title: Re: Malefor´s sprites
Post by: ZoSo on June 07, 2014, 06:16:51 pm
I really love this sprite, no bad comments  :) I think this might even be one of my favorite sprites Ive ever seen here. Good job!
Title: Re: Malefor´s sprites
Post by: SpritingBrad on June 08, 2014, 07:40:57 am
I really love this sprite, no bad comments  :) I think this might even be one of my favorite sprites Ive ever seen here. Good job!

Than you. That means a lot to me... :D
Title: Re: Malefor´s sprites
Post by: SpritingBrad on June 08, 2014, 10:48:07 am
I was bored and created the SS octorock. Enjoy!
P.S. I´m now called Sp3ctrum. :)
Title: The Imprisoned MC style
Post by: SpritingBrad on June 09, 2014, 02:58:52 pm
I was two whole afternoons doing this and finally is done: The Imprisoned Mc style
Enjoy.  :D
Title: Kalle Demos MC style
Post by: SpritingBrad on December 05, 2014, 03:42:02 pm
I´m back with a new MC stye sprite. This time I made Kalle Demos MC style!!!!
Title: Re: Sp3ctrum´s sprites
Post by: Leduardo on December 06, 2014, 04:58:51 pm
Nice one.
Title: Twilight palace MC style
Post by: SpritingBrad on December 07, 2014, 12:01:41 pm
I did this one a long time ago  so here it is, Twilight Palace MC style.
Title: Minish Cap Demon
Post by: SpritingBrad on December 12, 2014, 02:51:24 pm
Have you ever wondered what a demon would look like in MC style?
Today you will know. I bring to you, Demon MC style!!!!!
Title: Mercay Island MC Style 1.0
Post by: SpritingBrad on April 02, 2015, 08:04:43 am
Today I bring to you Mercay Island MC style!! I got inspired by the isle of frost that Leduardo did and decided to start doing this.
I would like someone to help me out, with spriting the houses, starting with Oshus´ house.
Title: Re: Sp3ctrum´s sprites
Post by: AJAX on April 03, 2015, 12:36:27 am
Oh boy I can't wait to bomb some dodongos on this map!
Title: Mercay Island 2.0
Post by: SpritingBrad on April 03, 2015, 04:00:14 pm
Oh boy I can't wait to bomb some dodongos on this map!
Its looking great isn´t it? I´m having so much fun doing this!!! XD XD

I´ve worked on it more. Turning out great!!
Title: Re: Sp3ctrum´s sprites
Post by: Leduardo on April 04, 2015, 10:06:02 pm
nice!
Title: Mercay Island 3.0
Post by: SpritingBrad on April 07, 2015, 07:51:31 pm
UPDATE!!

I need the other houses, the temple and the shipyard.

the water is going to be the shadowgazers

Title: Re: Sp3ctrum´s sprites
Post by: MG-Zero on April 08, 2015, 01:28:50 pm
Jesus man, you've been busy! O_o
Title: Re: Sp3ctrum´s sprites
Post by: SpritingBrad on April 08, 2015, 02:43:27 pm
Jesus man, you've been busy! O_o

XD I know!! Im trying my best and doind some work at this when I get time. :P
Title: Re: Sp3ctrum´s sprites
Post by: Darklink45 on April 08, 2015, 04:43:40 pm
Great work man!
Definitely refreshing to see something from PH. Though there are some tilling errors near the bridge/waterfall and the entrance to the town.  ;)
Title: Re: Sp3ctrum´s sprites
Post by: SpritingBrad on April 08, 2015, 04:55:52 pm
Great work man!
Definitely refreshing to see something from PH. Though there are some tilling errors near the bridge/waterfall and the entrance to the town.  ;)
where? I can´t see them... im working on it now so I can fix it right away.

EDIT: I tried to fix it, any better? (at the top the island is flooding XD)

EDIT 2: the one on the path way is also fixed. just not in the picture.
Title: Re: Sp3ctrum´s sprites
Post by: MG-Zero on April 08, 2015, 06:29:59 pm
Do you have a spritesheet of any kind for that water?  It looks fantastic!
Title: Re: Sp3ctrum´s sprites
Post by: SpritingBrad on April 08, 2015, 07:24:14 pm
Do you have a spritesheet of any kind for that water?  It looks fantastic!

the water is from kingmob´s shadowgazer, Leduardo used it for his Isle of Frost, I am using it because I want not only to make this island, but ALL the slands and put the together on one huge map.
Title: Re: Sp3ctrum´s sprites
Post by: MG-Zero on April 08, 2015, 07:41:19 pm
I'd actually like to use it as well for King of Thieves.  I'll see if maybe Leduardo has any sheets of it then.  Can't ask King Mob since he's long gone :(
Title: Re: Sp3ctrum´s sprites
Post by: Darklink45 on April 09, 2015, 01:38:50 am
Great work man!
Definitely refreshing to see something from PH. Though there are some tilling errors near the bridge/waterfall and the entrance to the town.  ;)
where? I can´t see them... im working on it now so I can fix it right away.

EDIT: I tried to fix it, any better? (at the top the island is flooding XD)

EDIT 2: the one on the path way is also fixed. just not in the picture.

Yeah, that looks better.

I'd actually like to use it as well for King of Thieves.  I'll see if maybe Leduardo has any sheets of it then.  Can't ask King Mob since he's long gone :(

The tiles come from this image:
(http://www.zfgc.com/users/kingmob/15.png)

Actually I think those are two sets of tiles, one overlaps the other, achieving the effect seen in Wind Waker.
I attached them below. (note: I think the tiles that go above have transparent background.)
Title: Mercay Island 4.0
Post by: SpritingBrad on April 17, 2015, 06:25:14 pm
It is almost done!! I have to finish the outline of the island, put some trees and bushes, and place the temple, the house of the left of the island and the shipyard (I need help with those, please) and the small island on the top right.

Title: Re: Sp3ctrum´s sprites
Post by: Max. on April 17, 2015, 06:44:29 pm
This is pretty sweet. I really like all the diagonal cliffs, which to be honest I had forgotten minish cap graphics had? Or did it not, actually? Either way, it looks pretty sweet. The dock way on the right looks a bit incongruous to me though, maybe you might want to try working out the boardwalk thing from the tiny minish village? There was a dock kinda thing at the end that has stuff obscuring some of it, but you could probably pull something alright from it:

http://vignette1.wikia.nocookie.net/zelda/images/d/d3/Minish_Village_Map.png/revision/latest?cb=20100719233303
Title: Re: Sp3ctrum´s sprites
Post by: SpritingBrad on April 17, 2015, 07:28:38 pm
This is pretty sweet. I really like all the diagonal cliffs, which to be honest I had forgotten minish cap graphics had? Or did it not, actually? Either way, it looks pretty sweet. The dock way on the right looks a bit incongruous to me though, maybe you might want to try working out the boardwalk thing from the tiny minish village? There was a dock kinda thing at the end that has stuff obscuring some of it, but you could probably pull something alright from it:

http://vignette1.wikia.nocookie.net/zelda/images/d/d3/Minish_Village_Map.png/revision/latest?cb=20100719233303

The diagonal cliffs are not in the actual game, I made them.
what do you thing of the dock way now? Better?
Title: Re: Sp3ctrum´s sprites
Post by: Max. on April 17, 2015, 07:56:07 pm
Yeah! Looks superb!
Title: Mercay Island 5.0
Post by: SpritingBrad on April 18, 2015, 05:29:27 pm
It is nearly finished!!

Things to be done:
-Shipyard (I need help with this one...)
-Second Island
-Put bushes and trees around the empty spaces of the island.

Also tell me what you guys think od the temple, is it ok? I think it looks great!!
Title: Mercay Island 6.0
Post by: SpritingBrad on April 19, 2015, 05:28:00 pm
The next one is the final one!! All I need is the Shipyard (feedle´s purple buckets also.) and its finished!!
But for now, I will move to something else, something you will enjoy aswell.
Title: Re: Sp3ctrum´s sprites
Post by: Leduardo on April 23, 2015, 11:43:40 pm
Its a very good work.
I just simplify the amount of mountain layers at the top. That would make the map cleaner.
Title: Re: Sp3ctrum´s sprites
Post by: Leduardo on April 24, 2015, 04:16:15 am
I used his temple as a basis to create something more like the original game.
The temple is not finished.
The shadows need to be better worked, as well as some textures.
I believe that you can improve.
Title: Re: Sp3ctrum´s sprites
Post by: SpritingBrad on April 24, 2015, 05:33:34 am
I used his temple as a basis to create something more like the original game.
The temple is not finished.
The shadows need to be better worked, as well as some textures.
I believe that you can improve.

WOW!! That looks great!! Thanks man!!
Title: Re: Sp3ctrum´s sprites
Post by: MG-Zero on April 24, 2015, 08:15:34 pm
Wow, very nice!  I like that you added a lot of depth to the height of the temple.
Title: Re: Sp3ctrum´s sprites
Post by: Darklink45 on May 01, 2015, 03:48:50 am
I made the Shipyard! Took me like half a day.

But enjoy it, you should finnish the island now.  ;)
Title: Re: Sp3ctrum´s sprites
Post by: Leduardo on May 01, 2015, 06:00:52 am
Wow!
Nice.
Title: Re: Sp3ctrum´s sprites
Post by: SpritingBrad on May 01, 2015, 11:25:11 am
I made the Shipyard! Took me like half a day.

But enjoy it, you should finnish the island now.  ;)

That looks fantastic!! thank you so much!! here is the final, if there is anything wrong with it, let me know :)

Give credit to:
Sp3crum
Leduardo for temple of the ocean king,  shop
Darklink for shipyard
Kingmob for seatiles
Title: Re: Sp3ctrum´s sprites
Post by: MG-Zero on May 01, 2015, 12:59:21 pm
Looking really nice!  Keep it up!
Title: Lanayru mine MC style
Post by: SpritingBrad on May 10, 2015, 02:28:25 pm
When I saw leduardo´s tileset for the lanayru mine from skyward sword, I wanted to see how it would look put together. So here is my attempt of the center area.
Title: Isle of Ember MC Style 1.0
Post by: SpritingBrad on May 22, 2015, 08:02:54 pm
I finally have put this together. Took me some time to make the tiles and get the colours just right.
Title: Isle of Ember 2.0
Post by: SpritingBrad on May 25, 2015, 05:36:20 pm
I have put the floor textures on it before I go on to the other layers.
Also there is a seperate second layer so i can use it later.
Title: ALTTP to MC style
Post by: SpritingBrad on June 15, 2015, 06:37:50 pm
Here is a little glimpe, tell me what you think
Title: Re: Sp3ctrum´s sprites
Post by: Miles07 on June 15, 2015, 10:37:59 pm
Kaka-RIIII-ko! Good luck with the details!
Title: Re: Mercay Island 2.0
Post by: verifiaman on June 16, 2015, 10:29:53 am
Oh boy I can't wait to bomb some dodongos on this map!
Its looking great isn´t it? I´m having so much fun doing this!!! XD XD

Are the diagonal tiles free for use in this?

I´ve worked on it more. Turning out great!!
Title: Re: Mercay Island 2.0
Post by: SpritingBrad on June 16, 2015, 04:00:13 pm
Are the diagonal tiles free for use in this?

Sure!! Go ahead and use them!!
Title: Re: Sp3ctrum´s sprites
Post by: UknownXL on June 16, 2015, 04:09:15 pm
Absolutely love the tiles. It looks amazing! Its giving me further inspiration for my own game.

Excellent work!
Title: Re: Sp3ctrum´s sprites
Post by: SpritingBrad on June 16, 2015, 04:50:26 pm
Absolutely love the tiles. It looks amazing! Its giving me further inspiration for my own game.

Excellent work!

Wow thanks!! That means a lot!! :D
Title: ALTTP to MC style: KAKARIKO Finished
Post by: SpritingBrad on June 17, 2015, 12:35:02 pm
I finished kakariko!! XD
What do you guys think?
Title: Re: Sp3ctrum´s sprites
Post by: Miles07 on June 17, 2015, 01:22:27 pm
Those houses look too similar IMO...  :-\
Also, where's Sahasrahla's house?

Additionally, I think that the "street" where the Running Man would be is too narrow for players to accurately follow him.
Title: Re: Sp3ctrum´s sprites
Post by: SpritingBrad on June 17, 2015, 05:30:46 pm
Those houses look too similar IMO...  :-\
Also, where's Sahasrahla's house?

Additionally, I think that the "street" where the Running Man would be is too narrow for players to accurately follow him.

Im trying my best, but it is hard to change artstyles. :P
Title: Deku Baba MC style
Post by: SpritingBrad on June 18, 2015, 03:32:25 pm
There has been so many attempts to make one that fits into Minish Cap style that I just can´t put a number on it.
But I think I finally sprited the ULTIMATE one!!!
Tell me what you think XD
Title: Deku Baba MC style 2.0
Post by: SpritingBrad on June 18, 2015, 07:09:32 pm
Update! Left and right views are done!! Last to go is back view...
Title: Re: Sp3ctrum´s sprites
Post by: Miles07 on June 18, 2015, 07:47:10 pm
YES! Well done, Sp3c!
Title: Deku Baba MC style 3.0 FINAL
Post by: SpritingBrad on June 19, 2015, 08:53:20 am
YES! Well done, Sp3c!
Thanks!! XD
Here is the final!!

I think he could be used for KoT or something :P
Title: Re: Sp3ctrum´s sprites
Post by: MG-Zero on June 19, 2015, 12:55:29 pm
oho, very nice work!  I'm not sure if we have a Deku Baba npc in the design doc, but I'll double check :)
Title: Re: Sp3ctrum´s sprites
Post by: Starforsaken101 on June 19, 2015, 01:52:03 pm
Very nice Deku Baba! Only critique I'd give is on the side shots of it biting, give it more of an over-bite rather than under-bite.
Title: Deky Baba MC style update
Post by: SpritingBrad on June 19, 2015, 04:01:50 pm
oho, very nice work!  I'm not sure if we have a Deku Baba npc in the design doc, but I'll double check :)

ok ;)

Very nice Deku Baba! Only critique I'd give is on the side shots of it biting, give it more of an over-bite rather than under-bite.

I tryed what you suggested, any better?
Title: Re: Deky Baba MC style update
Post by: Miles07 on June 19, 2015, 05:33:18 pm
Very nice Deku Baba! Only critique I'd give is on the side shots of it biting, give it more of an over-bite rather than under-bite.
I tryed what you suggested, any better?
Going from left-to-right, poses 9, 10, 11, and 12. If you can make the top "jaw" one pixel wider, then that could work. The stretching effect would fit into the cartoony style of MC.
Title: Re: Deky Baba MC style update
Post by: SpritingBrad on June 19, 2015, 05:42:32 pm
Very nice Deku Baba! Only critique I'd give is on the side shots of it biting, give it more of an over-bite rather than under-bite.
I tryed what you suggested, any better?
Going from left-to-right, poses 9, 10, 11, and 12. If you can make the top "jaw" one pixel wider, then that could work. The stretching effect would fit into the cartoony style of MC.
Im working on it. I´ll post it immediately

EDIT: DONE!! XD XD
Title: Re: Deky Baba MC style update
Post by: Miles07 on June 19, 2015, 07:04:32 pm
Very nice Deku Baba! Only critique I'd give is on the side shots of it biting, give it more of an over-bite rather than under-bite.
I tryed what you suggested, any better?
Going from left-to-right, poses 9, 10, 11, and 12. If you can make the top "jaw" one pixel wider, then that could work. The stretching effect would fit into the cartoony style of MC.
Im working on it. I´ll post it immediately
EDIT: DONE!! XD XD
That looks SOOOO much better! *saves file*
Title: Moleman MC style
Post by: SpritingBrad on June 20, 2015, 05:17:29 pm
I don´t know how no one has done this yet!! XD
Title: Re: Moleman MC style
Post by: Miles07 on June 20, 2015, 05:23:25 pm
I don´t know how no one has done this yet!! XD
Something tells me that eventually a Mogma would result from that...  ;)
Title: Re: Moleman MC style
Post by: SpritingBrad on June 20, 2015, 05:47:47 pm
I don´t know how no one has done this yet!! XD
Something tells me that eventually a Mogma would result from that...  ;)
I think that this guy is the evolution of the mogmas, I mean, what happened to them after Skyward Sword?
Title: Re: Moleman MC style
Post by: Miles07 on June 20, 2015, 10:40:26 pm
I don´t know how no one has done this yet!! XD
Something tells me that eventually a Mogma would result from that...  ;)
I think that this guy is the evolution of the mogmas, I mean, what happened to them after Skyward Sword?
Since Minish Cap comes after Skyward Sword in the official timeline, I'd say the Mole Mitts are related to the Mogma or Digging Mitts. Beyond that, I dunno.
(Although, since the Subrosians live underground, it might be possible that underneath those cloaks...  :huh:)
Title: Re: Sp3ctrum´s sprites
Post by: Starforsaken101 on June 21, 2015, 01:57:41 am
(I know I'm late but good improvement on the baba :))
Title: Re: Moleman MC style
Post by: SpritingBrad on June 21, 2015, 10:21:45 am
I don´t know how no one has done this yet!! XD
Something tells me that eventually a Mogma would result from that...  ;)
I think that this guy is the evolution of the mogmas, I mean, what happened to them after Skyward Sword?
Since Minish Cap comes after Skyward Sword in the official timeline, I'd say the Mole Mitts are related to the Mogma or Digging Mitts. Beyond that, I dunno.
(Although, since the Subrosians live underground, it might be possible that underneath those cloaks...  :huh:)

I think the subrosian theory could be a good idea for a fan game. XD


(I know I'm late but good improvement on the baba :))

Thanks Star :)
Title: Soldier MC
Post by: SpritingBrad on June 21, 2015, 11:04:10 am
I read somewere someone needed more moves for the soldier. So here they are.
Title: Gate of Time MC style
Post by: SpritingBrad on June 22, 2015, 09:49:13 pm
Here is something magnificent!!
Also here is a video of how I made it:
https://www.youtube.com/watch?v=ZP-G12xS7MQ (https://www.youtube.com/watch?v=ZP-G12xS7MQ)
Enjoy ;)
Title: Re: Spritonic´s sprites
Post by: Miles07 on June 22, 2015, 10:28:25 pm
That looks amazing! *saved*
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on June 22, 2015, 10:41:51 pm
That looks amazing! *saved*
Thanks dude!!
(Also subscribing would be nice XD)
Title: Re: Spritonic´s sprites
Post by: Kienamaru on June 24, 2015, 12:20:09 am
You've become quite the beast Malef... Spect... Spritonic!
Title: Re: Spritonic´s sprites
Post by: Miles07 on June 24, 2015, 01:29:45 am
You've become quite the beast Malef... Spect... Spritonic!
^^ this
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on June 24, 2015, 09:06:38 am
You've become quite the beast Malef... Spect... Spritonic!

Haha thanks! I am the spriting beast! Fear the Pixels!
Title: Re: Spritonic´s sprites
Post by: Leduardo on June 24, 2015, 05:38:10 pm
Nice.
I didn't Know the graficsGale. It will help me a lot.
Title: Re: Spritonic´s sprites
Post by: Kienamaru on June 30, 2015, 02:01:30 am
You've become quite the beast Malef... Spect... Spritonic!

Haha thanks! I am the spriting beast! Fear the Pixels!

Name change to Spriting Beast confirmed? (Sometime mid 2015)
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on June 30, 2015, 05:30:34 am
You've become quite the beast Malef... Spect... Spritonic!

Haha thanks! I am the spriting beast! Fear the Pixels!

Name change to Spriting Beast confirmed? (Sometime mid 2015)

2015 has 4 numbers
1 is the 3rd number
4-1=3
Spritonic has 9 letters
9÷3=3
Spriting Beast has 13 letters
13 is made up of the numbers 3 and 1
13-1=12
12÷4(number of numbers in 2015)=3
ILUMINATI CONFIRMED
HALF LIFE 3 CONFIRMED
SPRITONIC IS IDIOT CONFIRMED XD
Title: Gate of Time MC style Update
Post by: SpritingBrad on July 03, 2015, 02:08:33 pm
Now sprinning!!

The simbols are not there because they are harder to make.
Title: Zora Throne MC style
Post by: SpritingBrad on July 26, 2015, 04:53:41 pm
I did the Zora throne from the oracle games in MC style, it could be used in KOT.
Title: Re: Spritonic´s sprites
Post by: Heartless on July 26, 2015, 05:15:52 pm
Gate of time looks awesome, I smell the scent of Skyward Sword 2d in the air!  XD
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on July 26, 2015, 05:25:49 pm
Gate of time looks awesome, I smell the scent of Skyward Sword 2d in the air!  XD

Why thank you! I have a video on youtube of how I made it, check it out if you´re interested!
Title: Re: Spritonic´s sprites
Post by: Heartless on July 26, 2015, 05:42:25 pm
Gate of time looks awesome, I smell the scent of Skyward Sword 2d in the air!  XD

Why thank you! I have a video on youtube of how I made it, check it out if you´re interested!
I watched the video a bit and was really surprised to see that you used mspaint to create it!
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on July 26, 2015, 05:48:10 pm
Gate of time looks awesome, I smell the scent of Skyward Sword 2d in the air!  XD

Why thank you! I have a video on youtube of how I made it, check it out if you´re interested!
I watched the video a bit and was really surprised to see that you used mspaint to create it!

I use MS paint to make everything I do, But I use GraphicsGale Also.
Title: Sealed grounds MC style
Post by: SpritingBrad on August 14, 2015, 06:21:31 pm
To bring this topic back to life I bring the sealed ground in minish cap! It is not finished, it still needs a lot of work, but it is a prototype so you can see how the spiral would have looked in minish cap.

I might change the trees for the other ones too.
Title: The imprisoned MC style
Post by: SpritingBrad on August 14, 2015, 06:34:33 pm
And for the sake of it:
Title: Re: Spritonic´s sprites
Post by: Kienamaru on August 27, 2015, 03:36:21 am
This stuff looks nice. I'm thinking about starting up on SoL again with an actual team this time, are you still interested in helping out with that?
Title: Mario enemies MC style
Post by: SpritingBrad on September 01, 2015, 09:49:01 pm
Boredom overtook me and I made this guys!

I put the original beside each one to see the comparison!

The goomba was made from the puffstool and the bob-omb from the mc bomb.
Title: Re: Spritonic´s sprites
Post by: Miles07 on September 01, 2015, 11:54:13 pm
Those would look good in a certain Link's Awakening remake...
Title: New MC Deku Palace
Post by: SpritingBrad on September 12, 2015, 11:54:31 am
I once attempted to do the Deku palace in minish cap style... It didn´t go so well. There were sooo many tiling errors that looking at it now... *Shivers*
So I wanted to make a new and improved version of the Deku Palace!
It is still not finished, it still needs a lot of work.

The Deku Throne was made by Leduardo.
I made custom tiles like the colored wooden wall pillars and the doors.

I also put a fake KOT screen so you can see how it would look if it were in KOT XD!

Tell me if you want to have the green bee-hive walls in the throne room or if you like them as it is!
Title: Re: Spritonic´s sprites
Post by: Max. on September 13, 2015, 04:51:13 pm
I like how in the screenshot, the king is just standing on his throne's seat like, yeah, it's normal to stand on chairs. I'd say the beehive walls are an important part of the throne room because they might make it more separate from the outside areas. Also, was the floor of the throne room grass? I thought it was either dirt or wood.
Title: Re: Spritonic´s sprites
Post by: Miles07 on September 13, 2015, 09:07:46 pm
I can already hear the music from Majora's Mask! Keep it up!
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on September 13, 2015, 10:08:14 pm
I like how in the screenshot, the king is just standing on his throne's seat like, yeah, it's normal to stand on chairs. I'd say the beehive walls are an important part of the throne room because they might make it more separate from the outside areas. Also, was the floor of the throne room grass? I thought it was either dirt or wood.

Actually in majoras mask he is standing in his chair doing his crazy dance.
The floor is dirt, I have to change that, and the walls too.
Title: ALTTP to MC style: Kakariko and outside of lost woods
Post by: SpritingBrad on December 18, 2015, 06:00:07 pm
I worked on this a little bit more!! I was inspired on the colours from the KoT field we made, so I implemented those onto this!!
Title: Re: Spritonic´s sprites
Post by: Miles07 on December 18, 2015, 07:44:41 pm
*hyahing intensifies*

Love it, Spry! Ahh, that takes me back to the good ol' days...
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on December 18, 2015, 07:55:20 pm
*hyahing intensifies*

Love it, Spry! Ahh, that takes me back to the good ol' days...

Haha, Thanks Miles!
I plan to finish this and maybe, do the dark world version. Who Knows :P
Title: ALTTP to MC style UPDATE: West field almost complete
Post by: SpritingBrad on December 19, 2015, 05:56:29 pm
I worked some more on this and I have the east field almost complete! There are a few areas I still need to tile, as you can see in the map.
In the original ALTTP map there are areas that don´t match up due to it being in sections. I don´t know if I should go the same way or if I should try to join the tiles that don´t match up. Any Ideas?
Title: ALTTP to MC style UPDATE: Desert
Post by: SpritingBrad on December 20, 2015, 02:15:04 pm
I finished tiling the west field and the desert. I´m having so much fun with this!!!
I decided to go the sector route, like the original.

EDIT: I´m editing this since I just finished the flute boy´s area.
Title: Re: Spritonic´s sprites
Post by: MG-Zero on December 21, 2015, 02:20:01 pm
holy cow man, that's two entire areas in 48 hours xD
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on December 21, 2015, 02:56:56 pm
holy cow man, that's two entire areas in 48 hours xD

Actually 9 sections:
-Kakariko Village
-The Desert
-Flute Boy´s Area
-Forest Area 1
-Fortune Teller Area
-Forest Entrance
-Grassy Area 1
-Library area
-Race area

I am doing the map by sections, like it was in ALTTP, then putting them together in one huge map.
Title: Re: Spritonic´s sprites
Post by: MG-Zero on December 21, 2015, 02:58:37 pm
Well now, I'll just go and eat my shoe
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on December 21, 2015, 03:17:20 pm
Well now, I'll just go and eat my shoe

 XD XD XD XD XD XD XD

ANYWAY! I fixed a few tiling errors and almost finished the church area, I just need to do the church and the walls.

EDIT: Don´t worry on the chuch being to the side and in ALTTP style, I will fix that ;)
Title: ALTTP to MC style UPDATE: More areas complete!!
Post by: SpritingBrad on December 21, 2015, 08:15:30 pm
Cementary and church areas complete!! (And maybe other areas which I don´t remember :P) This is going so fast, even I am freaked out! HAHAHAHA!
Eitherway, by the end of Christmas this will be finished, if there is nothing to stop me that is :P
Title: Re: Spritonic´s sprites
Post by: Diminish on December 21, 2015, 08:34:25 pm
It looks really neat; whenever I look at the official Minish Cap game areas involving grass I always think it's muddy/dirty/dying, nice to see that someone can make the grass look clean/lively.
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on December 21, 2015, 10:35:28 pm
It looks really neat; whenever I look at the official Minish Cap game areas involving grass I always think it's muddy/dirty/dying, nice to see that someone can make the grass look clean/lively.

Wow thanks!! That means a lot! Yeah the grass in minish cap looked to yellow and bright. Not sure why nintendo used those colours but hey, they still look good. I used a darker green because A, it fits the color of Alttp, and B, I liked it when se used it in the KoT field. So I think its turing out great and its getting good feedback, which is awesome!
Title: Re: Spritonic´s sprites
Post by: Max. on December 22, 2015, 05:33:10 pm
What. You're too fast. Slow down. XD

You should do a sped-up video of you tiling some areas, I think you did one before too? But I want to watch you and learn how you do this so quickly, and it still looks fantastic.

But yeah, looks great. I like the colors you chose for the church, it really pops and works well with the rest of your palette.
Title: Re: Spritonic´s sprites
Post by: SpritingBrad on December 23, 2015, 11:13:05 am
What. You're too fast. Slow down. XD

You should do a sped-up video of you tiling some areas, I think you did one before too? But I want to watch you and learn how you do this so quickly, and it still looks fantastic.

But yeah, looks great. I like the colors you chose for the church, it really pops and works well with the rest of your palette.

I will NOT slow down!! HAHAHA!
I recorded how I did half of the castle since I had the other half done. I finished it in 1 hour and 5 mins more or less.
I haven´t uploaded the video yet. When I do, I will let you know. :)

EDIT: The video will be up shortly, but here is the link anyways: https://www.youtube.com/watch?v=sYk14kT19iY&feature=youtu.be
Subscribe and leave a like if you want more and tell me if you have any requests!
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on December 23, 2015, 03:21:54 pm
I think since I reached 1000 posts its about time you guys new my name!!
Its Bradley, but just call me Brad. :P

And yes, another name change!! XD
Title: Re: SpritingBrad´s sprites
Post by: MG-Zero on December 23, 2015, 03:27:51 pm
Ahh, King Bradley is among us!

(http://static.comicvine.com/uploads/original/11117/111179331/3977476-bradley.jpg)
Title: Re: SpritingBrad´s sprites
Post by: Max. on December 23, 2015, 09:58:24 pm
Haha, that's an easier name to call you anyway : )

Also, I just watched the video. The "what the hell is this" thing is a small tree, I think XD
You could replace them with statues or make really small saplings, depending on how closely you wanted your MC edit to resemble the original.
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on December 23, 2015, 10:20:51 pm
Haha, that's an easier name to call you anyway : )

Also, I just watched the video. The "what the hell is this" thing is a small tree, I think XD
You could replace them with statues or make really small saplings, depending on how closely you wanted your MC edit to resemble the original.

I actually thought they were mushrooms! XD
But saplings makes more sense. I will see how I can make them. Maybe edit those pullable mushrooms from MC.
Title: Re: SpritingBrad´s sprites
Post by: Shane on December 31, 2015, 06:54:56 am
You definitely got something going with this graphical conversion! While I still prefer how aLttP originally looked, this is pretty neat and looks legit. But I wonder if the fence maze mini-game is possible? It looks impossible from a gameplay perspective!

Also Nintendo has already sprited 2x2 rocks that you can lift which can be seen in Four Swords (http://www.spriters-resource.com/resources/sheets/2/1633.png). I pointed this out because the current ones might look great for the giant rocks seen in the Great Swamp and at the entrance of the Ice Cavern near Lake Hylia. Also why not replace the Dark World portals with the blue dungeon portals seen in the Minish Cap? I think that makes sense.

All in all, so far so good. A Link Between Worlds is one of my favorite Zeldas, and this project has me interested! Good luck with the project. =)
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on January 02, 2016, 07:50:04 pm
You definitely got something going with this graphical conversion! While I still prefer how aLttP originally looked, this is pretty neat and looks legit. But I wonder if the fence maze mini-game is possible? It looks impossible from a gameplay perspective!

Also Nintendo has already sprited 2x2 rocks that you can lift which can be seen in Four Swords (http://www.spriters-resource.com/resources/sheets/2/1633.png). I pointed this out because the current ones might look great for the giant rocks seen in the Great Swamp and at the entrance of the Ice Cavern near Lake Hylia. Also why not replace the Dark World portals with the blue dungeon portals seen in the Minish Cap? I think that makes sense.

All in all, so far so good. A Link Between Worlds is one of my favorite Zeldas, and this project has me interested! Good luck with the project. =)
Thanks, means a lot!
I added those rock that you said. I don´t think that the gate maze will be a problem, since I did it as it was in Alttp.
SO! A little update! I did the lost woods, what do you think?
Title: ALTTP to MC style UPDATE: West nearly complete
Post by: SpritingBrad on January 09, 2016, 04:49:14 pm
NEW UPDATE!
I made Link´s house area and I started to do the swamp region. I just have to finish the swamp and do the desert entrance to finish the west of Hyrule!
Since the file is too large to be put on one simple sheet I decided to cut it in half. (If you want to see if complete just put them together on paint of Graphics Gale)
Title: Re: SpritingBrad´s sprites
Post by: Zhello on January 09, 2016, 06:14:07 pm
Nice lol the maps look shiny  8)
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on January 09, 2016, 11:26:21 pm
I think its due to the MC palette. Its meant to be bright. Thats why I put a darker green for the grass instead of the yellowy green minish cap had.
Title: ALTTP to MC style UPDATE: WEST COMPLETE!!
Post by: SpritingBrad on January 10, 2016, 03:49:18 pm
Finally the west is complete!!
I tried to make the cliffs match up and it turned out great!!
East of Hyrule coming up!!
Title: Re: SpritingBrad´s sprites
Post by: 4ndaKava on January 23, 2016, 05:05:04 pm
Man.. You have almost mapped the entire map of alttp in 1 month :o
Anyone doing a MC styled alttp?   :D
Title: ALTTP to MC style UPDATE: East field almost complete!!
Post by: SpritingBrad on January 30, 2016, 10:26:15 am
NEW UPDATE!!
I have done A LOT of work on this. and since this is SO big, I just posted the eastern side of the map, staring with the castle area.
The eastern palace still needs to be tiled to completion and there are some areas that I have to start working on also.
When I finish all of the remaining field, I will move to Death Mountain, and that is going to be a pain XD
Title: Re: SpritingBrad´s sprites
Post by: MaJoRa on January 30, 2016, 11:44:10 am
This is a really cool project. Do you have plans for the dark world when you're done with the light world?
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on January 30, 2016, 07:07:18 pm
By the skies, that's awesome! I especially love how true-to-the-original the Eastern Palace area is.
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on January 31, 2016, 12:45:29 am
This is a really cool project. Do you have plans for the dark world when you're done with the light world?

Actually, yes! I was thinking about it while I was working in this and I already did the dark world trees :P

By the skies, that's awesome! I especially love how true-to-the-original the Eastern Palace area is.

Thats because I use the original as a base. Change the alttp tiles with the mc ones, but I sometimes have to modify the cliffs a little so they can fit to where I want them to be. I am also trying to make all the areas match perfectly, since in Alttp they didn't.
Title: PH Fire Temple MC Style
Post by: SpritingBrad on May 21, 2016, 11:18:54 am
I attempted to do the Fire temple from Phantom Hourglass in MC Style! It is the first floor.
I absolutely love how it looks, what do you think?
Title: Re: SpritingBrad´s sprites
Post by: dotyue on May 21, 2016, 12:01:30 pm
 XD looks really nice, but sadly its not really mc-style since its out of perspective... looks more like a game boy mc recolor
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on May 21, 2016, 01:38:18 pm
XD looks really nice, but sadly its not really mc-style since its out of perspective... looks more like a game boy mc recolor
I actually edited the walls of those caves from MC that you enter with the mole mitts. I don´t think how it is "Out of perspective" :/
I think it looks like a GB recolor because of how the layout actually is, but that is how the actual PH layout was, I just tiled the map editing Existing Mc tiles.
Glad you liked it! ;)
Title: Re: SpritingBrad´s sprites
Post by: dotyue on May 21, 2016, 01:49:22 pm
XD looks really nice, but sadly its not really mc-style since its out of perspective... looks more like a game boy mc recolor
I actually edited the walls of those caves from MC that you enter with the mole mitts. I don´t think how it is "Out of perspective" :/
I think it looks like a GB recolor because of how the layout actually is, but that is how the actual PH layout was, I just tiled the map editing Existing Mc tiles.
Glad you liked it! ;)

Well just look at the other indoor maps, like for example the mc firetemple ( http://www.vgmaps.com/Atlas/GBA/LegendOfZelda-MinishCap-CaveOfFlames.png)
while your "mole cave" has the straight walls like " |____| " the other mc indoors have " \_______/ " kind of perspective like in lttp but just a little different.
Thats why it looks like a gbc recolor where the perspective is upfront.

"If" you want to change it, just make the walls 2x tall (like 2/3 of the long walls) and add cornerwalls. The rest looks fine from what i see, the "new walls" would change the map a bit, but thats almost always given when converting to other styles.


edit: just a small mockup i took from lets play ph screenshots to point out the difference
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on May 21, 2016, 02:15:25 pm
XD looks really nice, but sadly its not really mc-style since its out of perspective... looks more like a game boy mc recolor
I actually edited the walls of those caves from MC that you enter with the mole mitts. I don´t think how it is "Out of perspective" :/
I think it looks like a GB recolor because of how the layout actually is, but that is how the actual PH layout was, I just tiled the map editing Existing Mc tiles.
Glad you liked it! ;)

Well just look at the other indoor maps, like for example the mc firetemple ( http://www.vgmaps.com/Atlas/GBA/LegendOfZelda-MinishCap-CaveOfFlames.png)
while your "mole cave" has the straight walls like " |____| " the other mc indoors have " \_______/ " kind of perspective like in lttp but just a little different.
Thats why it looks like a gbc recolor where the perspective is upfront.

"If" you want to change it, just make the walls 2x tall (like 2/3 of the long walls) and add cornerwalls. The rest looks fine from what i see, the "new walls" would change the map a bit, but thats almost always given when converting to other styles.

Yes, But those walls would change the layout a whole lot, and it would be very difficult to change it to those walls :/
I think this walls look good, and it is a change from the "classic" dungeon walls.
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on May 21, 2016, 03:53:33 pm
edit: just a small mockup i took from lets play ph screenshots to point out the difference

It looks good, but how would we tile this areas? There are very narrow walls and taller walls.
(See attachment)
Title: PH Fire Temple MC Style
Post by: SpritingBrad on May 21, 2016, 04:25:04 pm
I did the second floor of the temple! I am keeping the walls for now, we can change them later if we want.
Title: Re: SpritingBrad´s sprites
Post by: dotyue on May 21, 2016, 07:53:47 pm
edit: just a small mockup i took from lets play ph screenshots to point out the difference

It looks good, but how would we tile this areas? There are very narrow walls and taller walls.
(See attachment)

since they are a puzzle element:
- you could just "leave them be", for better viewing of the player and use a two tile straight wall on them
- you could make the new walls on them and have a small change in floor tiles

or the best solution, since you don't have a ds pen to guide the boomerang: redesign the puzzle for mc-controls

honestly, its your choice, only reason i point out that the walls needs changing is your telling us "PH Dungeon in MC Style" which its not until it's in mc style ;)
you do great sprites and tiles, without the "it's mc style" saying it would be more than fine and you can do what you want with your sprites

edit: btw whats up all those empty tiles? there ARE tiles beneath the fires of them (see attachment)
Title: PH Fire Temple sprite
Post by: SpritingBrad on May 27, 2016, 06:07:56 pm
I did the other three floors! There are still some things to be done, such as the pattern on the boss room floor, the doors...

As for the walls Yue, I think I will keep this ones for now, I only wanted to sprite the temple BASED on minish cap style, but keeping as close to the original as possible.
Title: MC style Slarok
Post by: SpritingBrad on June 22, 2016, 10:56:38 am
I attempted the Slarok! For those who don´t know what a Slarok is, it is the Darkworld counterpart of the octorok.
Title: Re: SpritingBrad´s sprites
Post by: Shane on June 23, 2016, 12:16:38 am
As someone who actually enjoyed Phantom Hourglass (though I enjoyed Spirit Tracks even more), I love your recreations of some of the maps. They look pretty nice as does everything else you have posted lately.
Title: MC Style Dacto and Snap Dragon
Post by: SpritingBrad on June 23, 2016, 05:46:22 pm
As someone who actually enjoyed Phantom Hourglass (though I enjoyed Spirit Tracks even more), I love your recreations of some of the maps. They look pretty nice as does everything else you have posted lately.
Thanks man, means a lot!

So I did the Dacto and Snap Dragon too!
Title: Re: SpritingBrad´s sprites
Post by: dotyue on June 24, 2016, 04:16:18 am
don't really know if i should like those mc Monsters or not... but the snap Dragon insteadly reminds me of the pseudo-3d style from an older yoshis Island game or donkey kong country
Title: Minish cap Sith from Star wars (Darth Maul, Darth Vader and more)
Post by: SpritingBrad on August 01, 2016, 06:20:01 pm
I was bored and I started to doodle around in paint. After a while I made these guys XD
I really enjoy how they turned up so here you are!
They are Darth vader, Darth Maul, Savage Opress, Kylo Ren and Supreme Leader Snoke.
Title: MC Overworld Tiles Re-imagined
Post by: SpritingBrad on August 30, 2016, 02:59:52 pm
So I have always though that Minish cap had weird cliffs. Now, don´t get me wrong, I LOVE Minish cap´s style, and the cliffs are actually really good. But I always thought the perspective was a bit off, like the sides and back are short and the front is way to long. So I made tiles using the MC tiles, but changing the perspective. I made all four sides the same height, and one tile tall. This gives more room for placing other tiles, and obviously we couldn´t forget of see-through water! I love when 2D games have this effect, and Minish cap lacked it. I thought it would fit MC very well, since link actually dives in-game.
Then, I edited the cliffs and made some variations, which can be arranged to make mountains and such. (The dirt cliffs on the far right could very well make death mountain)
I added a small preview of what it could look like put together, and I personally like it a lot. The cool thing about this is that only the cliffs are changed, and the rest is already made. Oh, And I changed the grass colour too XD

We could use this in King of Thieves, even though it would be a little bit of work since we would have to change the tiles a bit. But it would look SO much better. (specially in the River Basin, we could have chests and items underwater and link can dive to get them.)
Title: Re: MC Overworld Tiles Re-imagined
Post by: dotyue on August 30, 2016, 10:21:33 pm
So I have always though that Minish cap had weird cliffs. Now, don´t get me wrong, I LOVE Minish cap´s style, and the cliffs are actually really good. But I always thought the perspective was a bit off, like the sides and back are short and the front is way to long.

Well, when i look at your "correction" it looks like the LttP Topdown View, but Minish Cap ist more like a rotation to the front, simliar to the GameBoy Zelda Style. So it was fine like that, even if your "correction" ist good as its own style combination
Title: Re: MC Overworld Tiles Re-imagined
Post by: SpritingBrad on August 30, 2016, 10:39:04 pm
So I have always though that Minish cap had weird cliffs. Now, don´t get me wrong, I LOVE Minish cap´s style, and the cliffs are actually really good. But I always thought the perspective was a bit off, like the sides and back are short and the front is way to long.

Well, when i look at your "correction" it looks like the LttP Topdown View, but Minish Cap ist more like a rotation to the front, simliar to the GameBoy Zelda Style. So it was fine like that, even if your "correction" ist good as its own style combination

I tryed to make it the same as the interior tiles, but fitting One tile.
Title: Undertale Characters MC style
Post by: SpritingBrad on September 03, 2016, 10:28:49 pm
I attempted to make A few of the Undertale characters in MC style! Tell me what you think and if you want to see more
Title: Twilight Parasite Diababa MC style
Post by: SpritingBrad on September 10, 2016, 05:14:02 pm
I made Diababa in Minish Cap style.
Do you guys think it´s small? I can make it bigger.
Anyway, what do you think of this?

EDIT: I attempted a larger version, though its quite rough and needs some work.
Title: Morpheel MC style
Post by: SpritingBrad on September 13, 2016, 02:04:38 pm
So I attemped to sprite Morpheel in MC style... It didn´t go so well. This thing is MASSIVE! Like 6 times link´s size. I did the best I could, and only the mouth of the front view. To make a sprite sheet to put it into a MC style game, we would need to make the body, the head and the fins in ALL 8 directions + Looking up and down.

This one is truly hard to make XD
Title: Shadow Beast MC Style
Post by: SpritingBrad on November 11, 2016, 10:01:57 pm
I´m back with something new! I made the front view of the shadow beast in MC Style!
What do you think? Is the overall sprite good? And what about the animation?
Title: Re: SpritingBrad´s sprites
Post by: Tonydaderp on November 13, 2016, 02:18:32 am
NICE!
Title: Shadow Beast MC Style - Side view
Post by: SpritingBrad on November 19, 2016, 08:16:21 am
NICE!

Thank you!!

I did the side view. The animation was a little bit hard to do, but I managed to pull it off! What do you think?
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on November 20, 2016, 04:00:39 am
I don't exactly see how this fits into the Minish Cap style, to be honest.
Title: Twili Race MC Style
Post by: SpritingBrad on December 04, 2016, 01:06:47 pm
I made something new today! The Twili race!
What do you guys think of this?
Title: Re: SpritingBrad´s sprites
Post by: dotyue on December 04, 2016, 01:21:58 pm
looking good, it's the first sprite of yours after a while i can tell, that it's really minish style =)

and as a prove, here they are pasted in a random minish cap screenshot from the internet:
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on December 04, 2016, 01:35:52 pm
looking good, it's the first sprite of yours after a while i can tell, that it's really minish style =)

and as a prove, here they are pasted in a random minish cap screenshot from the internet:

Thank you! It means a lot :)

Also a while back I attempted to do the shadow beasts, and I cannot seem to find a way to make them in MC style. Do you have any idea on how to improve them?
Title: Re: SpritingBrad´s sprites
Post by: dotyue on December 04, 2016, 05:06:10 pm
looking good, it's the first sprite of yours after a while i can tell, that it's really minish style =)

and as a prove, here they are pasted in a random minish cap screenshot from the internet:

Thank you! It means a lot :)

Also a while back I attempted to do the shadow beasts, and I cannot seem to find a way to make them in MC style. Do you have any idea on how to improve them?

Don't make them 1:1 as the dark Twilight Princess, try imagine how they would look in Wind Waker and sprite that ;)
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on December 04, 2016, 09:01:34 pm
That looks really good, Brad!
Title: Shadow Beast MC style (mask improvement)
Post by: SpritingBrad on December 10, 2016, 05:51:57 pm
That looks really good, Brad!
Thank you Miles!

looking good, it's the first sprite of yours after a while i can tell, that it's really minish style =)

and as a prove, here they are pasted in a random minish cap screenshot from the internet:

Thank you! It means a lot :)

Also a while back I attempted to do the shadow beasts, and I cannot seem to find a way to make them in MC style. Do you have any idea on how to improve them?

Don't make them 1:1 as the dark Twilight Princess, try imagine how they would look in Wind Waker and sprite that ;)

Ok, so I redid the mask completely and I think it looks much better now. I also attempted to make the mask in different directions, which will help later when animating the body.

I also changed a little bit the palette of the twili, just the part of their bodies, since the shadow beasts are corrupted Twili, they should have the same colours!

What do you think on the new mask?
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on December 10, 2016, 07:45:32 pm
Seems less flat. The added depth does approximate the Minish Cap style a bit more. It also looks like it could be an item, too, which is a plus.
Title: Shadow Beast MC Style - New body + animations (down view)
Post by: SpritingBrad on December 10, 2016, 08:17:09 pm
I made the body now, with the walking animation plus a growling animation.

Seems less flat. The added depth does approximate the Minish Cap style a bit more. It also looks like it could be an item, too, which is a plus.

I think it fits MC style a lot, now with the body and everything. I added the shadow beast to a random screenshot and it seems to fit quite well.

EDIT: I did the attack animation too.
Title: Re: SpritingBrad´s sprites
Post by: neike60 on December 11, 2016, 05:45:26 am
I did some modification on your shadow beast.
(http://img110.xooimage.com/files/7/a/8/shadow-beast-511ca42.png) (http://img110.xooimage.com/views/7/a/8/shadow-beast-511ca42.png/)
Title: Shadow Beast MC Style - Updated
Post by: SpritingBrad on December 11, 2016, 10:42:48 am
I did some modification on your shadow beast.
(http://img110.xooimage.com/files/7/a/8/shadow-beast-511ca42.png) (http://img110.xooimage.com/views/7/a/8/shadow-beast-511ca42.png/)


WHOAH!! That looks awesome man! Looks way better now. thanks :)
I´ll try to edit the other moves in the animations.

EDIT: I animated your edit Neike, and also added another fake screen with two of the new shadow beasts attacking Link.

Title: Shadow Beast Battle Barrier MC Style
Post by: SpritingBrad on December 12, 2016, 04:43:53 pm
Since I´m making the shadow beasts, I guess I should make the battle arena/barrier thingy that appears when there are shadow beasts.
Title: Midna MC style
Post by: SpritingBrad on December 12, 2016, 07:22:50 pm
Isn´t it obvious I love Twilight Princess? XD
Well, here´s Midna!

I used Neike´s Midna helmet since it is by far the best one and in my opinion it cannot be topped (Credit goes to him on that) I hope you don´t mind me using it Neike, it you have a problem with it let me know.

(If I keep on this rate I will sprite the entire game XD Think I will manage it? :P)

Title: Re: SpritingBrad´s sprites
Post by: neike60 on December 12, 2016, 10:53:48 pm
I don't mind and i did little edit on your midna.
(http://img110.xooimage.com/files/d/7/4/midna-5120ca7.png) (http://img110.xooimage.com/views/d/7/4/midna-5120ca7.png/)
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on December 13, 2016, 11:10:32 am
I don't mind and i did little edit on your midna.
(http://img110.xooimage.com/files/d/7/4/midna-5120ca7.png) (http://img110.xooimage.com/views/d/7/4/midna-5120ca7.png/)

I like it! I edited it just a little bit, and made her without the fused shadow too.
I also edited the twili colours too, they have to be the same after all :P
Title: TP chuchu and bokoblin MC style
Post by: SpritingBrad on December 15, 2016, 07:22:42 pm
Another Twilight Princess to MC style! This time Bokoblins and the chuchus (the goopy worm type that appear in TP)

Enjoy :)
Title: Shadow Beast MC Style - Side view
Post by: SpritingBrad on December 16, 2016, 06:19:37 pm
Side view done. All that´s left is the attack animation and up view, which I think it shouldn´t be too much of a problem.

This was really a pain, I had to redo it like 6 times because I didn´t like it. XD
Title: Shadow Kargarok Mc Style
Post by: SpritingBrad on December 16, 2016, 09:32:25 pm
Am I the only one posting these days? XD
Here is another Twilight princess enemy: The Shadow Kargarok
Title: Deku Baba and Baba Serpent MC Style
Post by: SpritingBrad on December 17, 2016, 05:48:51 pm
I fixed the animation of the Deku Baba I did a while back.

EDIT: I also made the Baba Serpent
EDIT 2: I changed the head of the Baba Serpent and the stem of both of them.
Title: TP Big Baba MC style
Post by: SpritingBrad on December 18, 2016, 02:38:04 pm
I attempted to do the Twilight Princess Big Baba in MC style. It was quite hard to do actually, I had to start it off from a hexagon XD But I think it turned out OK.

What do you think?
Title: Shadow Deku Baba MC Style
Post by: SpritingBrad on December 18, 2016, 09:19:36 pm
Seriously, am I the only one in this forum? Well, guess this forum is now mine  >:D (JK)

Anyhow, I made the Shadow Deku Baba.
Title: Baby Gohma, Young Gohma and Armogohma (Small eye spider)
Post by: SpritingBrad on December 19, 2016, 12:12:09 pm
I made the spiders from TP. The only one left is Armogohma, the BIG one.
Title: Armogohma MC style - Head and abdomen
Post by: SpritingBrad on December 19, 2016, 03:43:15 pm
I attempted to sprite Armogohma into MC style, And I think it is turning out fantastic for now.
What do you think of this so far?
Title: Armogohma MC style - Walking Animation
Post by: SpritingBrad on December 19, 2016, 05:42:43 pm
I am working on the legs right now. They need textures and then animation. This is so you can see the progress.

EDIT: I coloured the legs. TIME TO ANIMATE!
EDIT 2: I animated the legs.
Title: Armogohma MC style - All sides + Walking
Post by: SpritingBrad on December 20, 2016, 01:57:53 pm
I made the other sides too, plus the walking animation.
With this I say this is DONE!
Title: Fused Shadow + Fused Shadow Midna Monster (W.I.P)
Post by: SpritingBrad on December 21, 2016, 11:57:58 am
I made the rest of the pieces of the fused shadow as items and also as a wearable piece. I also attempted to make the shadow monster Midna transforms into when she puts the fused shadow on. Its still a work in progress.

What do you think?
Title: Re: SpritingBrad´s sprites
Post by: Darklink45 on December 21, 2016, 08:04:28 pm
Looks real nice, I see a little pillow shading in the big fused shadow, and I might add a darker shade of yellow/red on the body, but I don't remember the in-game model :p
Title: Re: SpritingBrad´s sprites
Post by: TomPel on December 22, 2016, 11:37:27 am
Yeah, looking good. Keep it up!
Title: Midna´s real form MC style
Post by: SpritingBrad on December 24, 2016, 10:42:05 am
Looks real nice, I see a little pillow shading in the big fused shadow, and I might add a darker shade of yellow/red on the body, but I don't remember the in-game model :p

You can see the model here: https://www.yobi3d.com/es/#!/search?q=midna&page=1
She has hands at the end of each arm/tentacle (due to resembling a squid) and her body is yellow and black.

Yeah, looking good. Keep it up!

Thanks man! :)

So I tried to make Midna´s real form. What do you guys think?
I edited minish cap Din and the midna we did earlier together to make this.
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on December 24, 2016, 08:00:53 pm
Love the Twili Midna sprites, dude!
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on December 24, 2016, 09:40:42 pm
Love the Twili Midna sprites, dude!

Thanks Miles!
Title: Re: SpritingBrad´s sprites
Post by: 4ndaKava on December 25, 2016, 03:29:32 pm
Midnas skin tone is very light in her real form. It looks too whitish in my opinion.

Other than that great work man. High quantity and quality. That's awesome.
Title: Some Ordon villagers
Post by: SpritingBrad on December 25, 2016, 05:31:44 pm
Midnas skin tone is very light in her real form. It looks too whitish in my opinion.

Other than that great work man. High quantity and quality. That's awesome.

Isn´t she supposed to have whitish skin? Twili are supposed to be living in shadows, so no sunlight his their skin (Sunlight is even harmful to them) so their skin colour is very much white. I took reference from the actual model of midna in Yobi3d.com and various screens and videos on youtube.

And thanks! :D

I made a few of the Ordon villagers. Mayor Bo, Ilia, Colin and Beth. I might do the rest in the future.
Opinions on this?
Title: Re: SpritingBrad´s sprites
Post by: dotyue on December 26, 2016, 01:53:46 am
Midnas skin tone is very light in her real form. It looks too whitish in my opinion.

Other than that great work man. High quantity and quality. That's awesome.

Isn´t she supposed to have whitish skin? Twili are supposed to be living in shadows, so no sunlight his their skin (Sunlight is even harmful to them) so their skin colour is very much white. I took reference from the actual model of midna in Yobi3d.com and various screens and videos on youtube.

And thanks! :D

I made a few of the Ordon villagers. Mayor Bo, Ilia, Colin and Beth. I might do the rest in the future.
Opinions on this?

i think beth is too much like illia... cince their haircuts are not very much alike..
idk how too descripe this... beth is like flat hairish- and ilia is like bigger and more hair overall...

thats not a quality comment for the sprites overall, just what is first saw with the illia/beth sprites in comparison, since beth is vastly different than illia as a person in hair and style

(its late here... i go to bed now and maybe look in the morning at it with a clearer head)
Title: TP Zora MC style (Original by Desgrades) + River Zora
Post by: SpritingBrad on December 31, 2016, 07:21:13 pm
Midnas skin tone is very light in her real form. It looks too whitish in my opinion.

Other than that great work man. High quantity and quality. That's awesome.

Isn´t she supposed to have whitish skin? Twili are supposed to be living in shadows, so no sunlight his their skin (Sunlight is even harmful to them) so their skin colour is very much white. I took reference from the actual model of midna in Yobi3d.com and various screens and videos on youtube.

And thanks! :D

I made a few of the Ordon villagers. Mayor Bo, Ilia, Colin and Beth. I might do the rest in the future.
Opinions on this?

i think beth is too much like illia... cince their haircuts are not very much alike..
idk how too descripe this... beth is like flat hairish- and ilia is like bigger and more hair overall...

thats not a quality comment for the sprites overall, just what is first saw with the illia/beth sprites in comparison, since beth is vastly different than illia as a person in hair and style

(its late here... i go to bed now and maybe look in the morning at it with a clearer head)

I´ll see what I can do. (The hair is an edited version of Malon for both of them, so that´s maybe why)

So I decided to edit Desgrades´ Zora sprite into a full sheet. I edited the body of the zora with King Mob´s Zora sprite. I made the walking animation of the front view and then made the side view and back view, and made the mask´s other views. Again this sprite is ORIGINALLY MADE BY DESGRADES, I do not claim it as my own, its simply an edit.

EDIT: I made a River Zora too, from the River Zora Miles and I made a while back, but with this Zora body.
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on December 31, 2016, 11:34:58 pm
Wow, nicely done, Brad! (As per freakin' usual, you spriting genius, you!)
Title: TP Zora MC style Spear attack
Post by: SpritingBrad on January 01, 2017, 01:11:53 am
Wow, nicely done, Brad! (As per freakin' usual, you spriting genius, you!)

Thanks Miles! Really means a lot! :´D

So I expanded the sheet with custom moves now.
I made the Zora attack with its spear, I mean, why would he have a spear if he doesn't use it? XD
Title: Water and Fire Toadpoli MC style
Post by: SpritingBrad on January 01, 2017, 05:53:32 pm
Another Twilight Princess enemy sprited! This time the Toadpoli.

I´m curious, are this supposed to be the twilight princess equivalent of the River Zora? They are somewhat similar.
Title: King Bulblin MC Sprite [W.I.P]
Post by: SpritingBrad on January 02, 2017, 06:00:41 pm
I started to work on this today. I only made the front view walking animation, but it will be expanded in the future.
Enjoy.
Title: King Bulblin MC Sprite - side view
Post by: SpritingBrad on January 02, 2017, 08:07:52 pm
I made the side view of King Bulblin walking. This is actually quite fun to sprite!

EDIT: I fixed the body of the front view of King Bulblin a little bit.

Title: Re: SpritingBrad´s sprites
Post by: 4ndaKava on January 02, 2017, 11:30:25 pm
The latest sprites- especially the last one - are so awesome man!
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on January 03, 2017, 01:21:30 am
The latest sprites- especially the last one - are so awesome man!

Thanks man, really appreciate it :D
Title: King Bulblin MC Sprite - back view axe swing
Post by: SpritingBrad on January 04, 2017, 05:36:31 pm
I finished the walking animations and now I am trying to animate the axe swing attacks. I think it looks alright.
Title: Diababa MC style - head
Post by: SpritingBrad on January 04, 2017, 09:33:27 pm
I remade diababa, since I didn´t like my previous attempt. I made the head, I will work on the rest of the body soon.
Title: Diababa MC style - Body
Post by: SpritingBrad on January 05, 2017, 04:38:04 pm
I did the body. I made it with separate pieces like Gleerok, but I animated it nonetheless to see how it would move.
I also made the poisoned water, but just the one surrounding Diababa, with its shadow.
Title: Twilight Princess Link MC style
Post by: SpritingBrad on January 08, 2017, 06:06:54 pm
I attempted to sprite Link from TP. I basically made link taller, changed the palette and tweaked a few thing here and there. I only did the waking animation and Link teleporting animation.
Title: Zant MC Style
Post by: SpritingBrad on January 09, 2017, 06:30:32 pm
I am here with something new! I started to work on Zant. I made the walking animation for masked and unmasked, shooting projectile and the taking mask off animation, there is still a lot to do for this guy, but its a start! XD
Title: Re: SpritingBrad´s sprites
Post by: 4ndaKava on January 11, 2017, 06:49:58 am
Good sprites, and I think I'll just stop pointing that out as it seems to be always the case :D

So if you look at the MC Link you see that every part of his face is very distinct. You can easily distinguish between eyes, skin, hair etc. and there are also small black/darker borders to seperate e.g. the hair even more from the skin. That is not the case for Zant without his mask and Midna's true form. It is much harder to distinguish these aspects (eyes, hair) in those sprites. Also, what is that big white part at the bottom of Zant's face? His smile/teeth? It looks kind of weird.
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on January 11, 2017, 10:45:50 pm
Good sprites, and I think I'll just stop pointing that out as it seems to be always the case :D

So if you look at the MC Link you see that every part of his face is very distinct. You can easily distinguish between eyes, skin, hair etc. and there are also small black/darker borders to seperate e.g. the hair even more from the skin. That is not the case for Zant without his mask and Midna's true form. It is much harder to distinguish these aspects (eyes, hair) in those sprites. Also, what is that big white part at the bottom of Zant's face? His smile/teeth? It looks kind of weird.

Minish cap link is meant to stand out since he is the player. For Midna I used Minish Cap Din sprite as a base, so her face and body is Din's but with various alterations. Zant's head was edited from Midna and half made from scratch. I wanted his head to fit the mask perfectly. I tryed to add a mouth to Zant, but it didnt look right so I decided.to have him 'mouthless', but I might try and figure out a way to sprite it. Many minish cap characters have varied faces and bodies, some are harder to distinguish than others. But I'm trying my best to make this sprites, and criticism is always welcome to improve :) After all, I base many of my character sprites on already existing minish cap caracters, as a reference or as a base.
Title: Zant MC Style - Side and back view + Weird Self-hug
Post by: SpritingBrad on January 13, 2017, 06:05:02 pm
I worked more on Zant! I made the other views, fixed the over all body a little bit (Hardly noticeable) and added a mouth, 4ndaKava. I think it looks better with a mouth now.
I also tried to make Zant hug himself and turn in this weird way like he does in twilight princess just before the battle, and I think it turned out ok.

What do you guys think?
Title: Wolf Link MC Style
Post by: SpritingBrad on January 20, 2017, 07:19:04 pm
I made my attempt of Wolf Link. I only did the front view.
What do you think?
Title: Re: Wolf Link MC Style
Post by: dotyue on January 20, 2017, 11:33:01 pm
I made my attempt of Wolf Link. I only did the front view.
What do you think?

That was my try of a wolf link...
Title: Wolf Link MC Style - Animated
Post by: SpritingBrad on January 21, 2017, 03:38:45 pm
I made my attempt of Wolf Link. I only did the front view.
What do you think?

That was my try of a wolf link...

That Wolf Link looks nice! Its so small haha! But why is it green? :P

I animated my Wolf Link to howl and run. And I added Midna too.
Title: Dark Beast Ganon MC Style [W.I.P]
Post by: SpritingBrad on February 02, 2017, 06:17:30 pm
I attempted to sprite Ganon from Twilight Princess into Minish cap style. I am using the in-game model as a reference from here (https://www.yobi3d.com/#!/search?q=ganon&page=1).
I was also inspired by Pepeztyle´s Twilight Princess Ganondorf, which you can see in his Ralph sheet here (https://www.spriters-resource.com/resources/sheets/81/84294.png).

What do you think of this so far?
Title: Re: SpritingBrad´s sprites
Post by: Darklink45 on February 03, 2017, 05:39:11 am
I attempted to sprite Ganon from Twilight Princess into Minish cap style. I am using the in-game model as a reference from here (https://www.yobi3d.com/#!/search?q=ganon&page=1).
I was also inspired by Pepeztyle´s Twilight Princess Ganondorf, which you can see in his Ralph sheet here (https://www.spriters-resource.com/resources/sheets/81/84294.png).
It's weird to see my old sprites being used, makes me feel honored :,)
Through
Anyway, that looks incredible Brad! Seems like a daunting tast to complete, just imagine animating that thing.
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on February 03, 2017, 06:17:59 am
 
It's weird to see my old sprites being used, makes me feel honored :,)

I'm not quite sure which sprite you are refering to when you said they are geing used haha. Recently Ive been trying to make sprites from scratch to challenge myself to improve. For Ganon I used the model, resized it and worked from there. Zant was also made from scratch for example, it took me a while to get the mask right, that was quite hard.

Anyway, that looks incredible Brad! Seems like a daunting tast to complete, just imagine animating that thing.

Thanks! I will first make the other views first and then animate it (maybe) I believe it can be done, with time and determination xD
Title: Re: SpritingBrad´s sprites
Post by: Darklink45 on February 03, 2017, 10:05:53 pm
It's weird to see my old sprites being used, makes me feel honored :,)
I'm not quite sure which sprite you are refering to when you said they are geing used haha. Recently Ive been trying to make sprites from scratch to challenge myself to improve.
Oh yeah, I meant the TP Ganandorf in Pepeztyle's sprite sheet. Yep, you've been improving a lot, I would say this Ganon is some of your best work, and it's not even finished  :P

Title: Dark Beast Ganon MC Style [W.I.P] - Update
Post by: SpritingBrad on February 03, 2017, 10:09:04 pm
It's weird to see my old sprites being used, makes me feel honored :,)
I'm not quite sure which sprite you are refering to when you said they are geing used haha. Recently Ive been trying to make sprites from scratch to challenge myself to improve.
Oh yeah, I meant the TP Ganandorf in Pepeztyle's sprite sheet. Yep, you've been improving a lot, I would say this Ganon is some of your best work, and it's not even finished  :P
Aaaah ok XD
Anyway, I fixed the front view a bit and made the front/diagonal. Next will be the side view. How does the new view look?
Title: Dark Beast Ganon MC Style [W.I.P] - Side View
Post by: SpritingBrad on February 04, 2017, 02:41:52 pm
Another view done! I´m having to much fun spriting this. XD
Title: Re: SpritingBrad´s sprites
Post by: TomPel on February 11, 2017, 06:56:40 am
Looks awesome! You really nailed the different perspectives. The tusks in the front view though look maybe a little odd. Not sure. But it's nice to see solid spritework in this site. ^^
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on February 11, 2017, 07:46:39 am
Looks awesome! You really nailed the different perspectives. The tusks in the front view though look maybe a little odd. Not sure. But it's nice to see solid spritework in this site. ^^

Thanks man!
The front tusks are really hard to do for some reason, they go straight and then up a bit. Not sure how to make it look just right haha, since when I tryed to sprite the tusks first they just looked round :/
Title: Re: SpritingBrad´s sprites
Post by: MG-Zero on February 11, 2017, 05:45:46 pm
that's smokin' hot looking!
Title: Breath of the Wild Sprites in MC style: Guardian, Link and Font
Post by: SpritingBrad on February 12, 2017, 04:06:43 pm
that's smokin' hot looking!
Thanks! I think you will like this one too XD
I attempted to make the Guardians from Breath of the Wild, I only did the head.
I also edited Link and made the BotW version, with the Champion´s clothes.
Also, I sprited the Breath of the wild font, the Sheikah writing I mean.
Enjoy :)
Title: Re: SpritingBrad´s sprites
Post by: Sinkin on February 16, 2017, 08:31:21 pm
Your spriting skills are getting better, great to see! Just made a quick edit of your Link sprite. Do what ever you want with it.
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on February 16, 2017, 08:51:00 pm
Your spriting skills are getting better, great to see! Just made a quick edit of your Link sprite. Do what ever you want with it.
Wow, that looks much better! I may animate it in the future, though I'm not sure. And thanks!
Title: Re: SpritingBrad´s sprites
Post by: dotyue on February 16, 2017, 09:44:08 pm
Your spriting skills are getting better, great to see! Just made a quick edit of your Link sprite. Do what ever you want with it.
Divine Spriting Skills like ever Sinkin =)
Title: Re: SpritingBrad´s sprites
Post by: Rayo on February 17, 2017, 02:15:40 am
I like it as well! Nice edit Sinkin!  :)
Title: Minish Cap style Tall Trees + new cliffs
Post by: SpritingBrad on February 20, 2017, 03:57:24 pm
A simple edit of the MC trees to make more variations. I always thought the original trees were too short, so I made some that are taller.

EDIT: I edited the Minish Cap cliffs so that they can be placed diagonally and are much smoother, and so that they can be taller if the mapper wants them to. You can see how they work on the example.
Title: Re: SpritingBrad´s sprites
Post by: Rayo on February 21, 2017, 01:29:39 am
Here is an alternate version of a tall tree with bigger stem.
Edit: And an alternate version of a tall tree with a smaller crown.
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on February 21, 2017, 03:58:53 pm
Here is an alternate version of a tall tree with bigger stem.
Edit: And an alternate version of a tall tree with a smaller crown.

Nice! I edited it a little bit.
EDIT: I moved the leafs and trunk a bit so that they fit the grid better. The small version of the tree looks a lot like the Alttp tree, which is awesome!
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on February 21, 2017, 06:34:43 pm
I started humming the ALttP Dark World theme upon seeing those trees, before reading the text! Nicely done, Brad and Rayo!

Now you just need a white palette or snow-covered treetops and you'd have some assets for making all four seasons represented!
Title: Re: SpritingBrad´s sprites
Post by: Rayo on February 21, 2017, 06:56:23 pm
Here is another small edit. I changed the size of the crown again for small tree.
Pine tree still looks a bit weird with that stem.
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on February 23, 2017, 01:36:24 am
Now you just need a white palette or snow-covered treetops and you'd have some assets for making all four seasons represented!
Here is another small edit. I changed the size of the crown again for small tree.

I spoke too soon!
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on February 28, 2017, 02:03:20 am
Nice ledges. I have a request for the trees though. is it possible make tiles so that it's easy to bunch them up? like how in the game boy zelda games the trees have tiles that give the illusion of a cluster of trees
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on February 28, 2017, 04:17:42 am
Actually you have something here with these ledges and rocks. you should expand on it, make it for every overworld area in minish cap.
Title: ALTTP Map MC style updated
Post by: SpritingBrad on February 28, 2017, 08:33:22 pm
Nice ledges. I have a request for the trees though. is it possible make tiles so that it's easy to bunch them up? like how in the game boy zelda games the trees have tiles that give the illusion of a cluster of trees

These trees are made to be put in clusters, you can see that in the map below as an example.

Actually you have something here with these ledges and rocks. you should expand on it, make it for every overworld area in minish cap.

I actually have that planned for the future :)

So I continued with the ALTTP map, changing the cliffs and trees, and I think it looks way better. What are your thoughts on this? There is still a lot of work to do and tiles to change.
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on February 28, 2017, 10:37:43 pm
Ohh those houses and roofs. tried making my own ended up as awful recolor. how do you expand on the house and roof tilesets?
Title: Hero´s Shade MC Style
Post by: SpritingBrad on March 04, 2017, 06:06:03 pm
Ohh those houses and roofs. tried making my own ended up as awful recolor. how do you expand on the house and roof tilesets?
What I did for the roofs was that I copied the middle and duplicated it to fit a whole tile (Its actually quite easy.)

So I made The hero´s shade in MC style. I think it looks quite good. Its a bit dark, but that´s how it was in TP, and I did use the MC palette, I looked for colors that were as close to the original. I think I pullet if off. Not too sure about the side view though.
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on March 08, 2017, 03:09:15 am
You think you can do lana from Hyrule warriors? i think i remember seeing a volga on this site somewhere but i cant find it.

Edit: also i made my own type of map using your tiles and some stuf fi foudn on the wiki (http://i298.photobucket.com/albums/mm277/verifiaman/hyruleprison_zps4m5khevn.png) (http://s298.photobucket.com/user/verifiaman/media/hyruleprison_zps4m5khevn.png.html)  the extra level of depth they provide is really helpful
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on March 08, 2017, 07:43:11 am
You think you can do lana from Hyrule warriors? i think i remember seeing a volga on this site somewhere but i cant find it.

Edit: also i made my own type of map using your tiles and some stuf fi foudn on the wiki (http://i298.photobucket.com/albums/mm277/verifiaman/hyruleprison_zps4m5khevn.png) (http://s298.photobucket.com/user/verifiaman/media/hyruleprison_zps4m5khevn.png.html)  the extra level of depth they provide is really helpful

I guess I can give lana a shot, volga was in Leduardo´s sprite thread.
I cannot see the map properly, try putting it on paint and on the attachment of your post. (But from what I an see it looks nice!)
Also, you should create your own thread and place the map (and any other work you make) there :)
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on March 12, 2017, 06:25:53 am
Well it seems photobucket changed the rules for its uploads..great.

Also i was searching on google for zelda like tiles to use when i came across yours for the king of thieves thing. those tiles of yours areonly for the game or are they free to use?
Title: BotW Bokoblin MC style
Post by: SpritingBrad on March 15, 2017, 03:44:58 pm
i made a simple sprite of the Bokoblin from Breath of the Wild. (I STILL haven´t played the game, but I will soon XD)
Title: Re: SpritingBrad´s sprites
Post by: Rayo on March 15, 2017, 07:51:22 pm
It will probably look better if you fuse your sprite with this Skyward Sword Bokoblin.
(I forgot who was the creator of this sprite, just found it on my computer)
Title: Re: SpritingBrad´s sprites
Post by: Sinkin on March 16, 2017, 01:08:34 pm
It will probably look better if you fuse your sprite with this Skyward Sword Bokoblin.
(I forget who was the creator of this sprite, just found it on my computer)
Oh my, those are mine haha, made them back in 2010  :-[

Anyway, I think you can make the Bokoblin a little bit bigger, if you look at the screenshots and art of it you can see that his body is kinda shaped like a pear. You can also see that he got a more hunching pose with his legs far apart kinda like a sumo stance. 
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on March 23, 2017, 05:54:50 pm
You ever thought about adding slopes an such to the mc cliff tiles like the ones in this http://www.vgmaps.com/Atlas/GB-GBC/LegendOfZelda-OracleOfSeasons-Subrosia.png basically front facing slopes for the top of the cliffs and let them be able to merge seamlessly with your cliff tiles.
Title: Minish Cap Crystal/Ruppee tiles
Post by: SpritingBrad on March 23, 2017, 06:17:25 pm
You ever thought about adding slopes an such to the mc cliff tiles like the ones in this http://www.vgmaps.com/Atlas/GB-GBC/LegendOfZelda-OracleOfSeasons-Subrosia.png basically front facing slopes for the top of the cliffs and let them be able to merge seamlessly with your cliff tiles.

Not sure what you mean exactly. Could you circle the cliff areas you are reffering to?

I have made something new today! I was looking through spriters resource Minish cap gallery and I came across the inside maps for the shrinking areas, and there was a very cool crystal formation inside it. I thought it looked cool, but I edited it to look more like a Ruppee, or more crystaline. (I was imagining a crystal theme area, maybe made of rupees, unlike rupee land, maybe a new iteration of Ruppee land XD)

I expanded upon the small crystal and made small barriers, though I cannot decide whether to keep the rounded sides or the more square ones.

What do you guys think of this? Should I expand into crystal cliffs and more stuff?
Title: Re: Minish Cap Crystal/Ruppee tiles
Post by: gaiamegu64 on March 24, 2017, 03:02:37 am
You ever thought about adding slopes an such to the mc cliff tiles like the ones in this http://www.vgmaps.com/Atlas/GB-GBC/LegendOfZelda-OracleOfSeasons-Subrosia.png basically front facing slopes for the top of the cliffs and let them be able to merge seamlessly with your cliff tiles.

Not sure what you mean exactly. Could you circle the cliff areas you are reffering to?

I have made something new today! I was looking through spriters resource Minish cap gallery and I came across the inside maps for the shrinking areas, and there was a very cool crystal formation inside it. I thought it looked cool, but I edited it to look more like a Ruppee, or more crystaline. (I was imagining a crystal theme area, maybe made of rupees, unlike rupee land, maybe a new iteration of Ruppee land XD)

I expanded upon the small crystal and made small barriers, though I cannot decide whether to keep the rounded sides or the more square ones.

What do you guys think of this? Should I expand into crystal cliffs and more stuff?

...yes.
Title: Pols Voice MC style
Post by: SpritingBrad on March 26, 2017, 02:05:28 pm
I bring today the Pols Voice! I did the front view only, with the attack animation.
Title: Re: Pols Voice MC style
Post by: dotyue on March 26, 2017, 09:41:52 pm
I bring today the Pols Voice! I did the front view only, with the attack animation.

animation does remind me of the majoras mask chuchu i made some time ago.

but its badass looking :D
maybe you want to take a look at a patamon sprite... (taunt 4 http://i.imgur.com/gmHzS.png )
Title: Re: Pols Voice MC style
Post by: SpritingBrad on March 26, 2017, 10:54:53 pm
I bring today the Pols Voice! I did the front view only, with the attack animation.

animation does remind me of the majoras mask chuchu i made some time ago.

but its badass looking :D
maybe you want to take a look at a patamon sprite... (taunt 4 http://i.imgur.com/gmHzS.png )

Thanks! I based the animation on the zol animation. I remeber your MM chuchu, it was awesome!

The patamon sprite will be useful to base the movement of the ears of the zol for the side view, thanks!
Title: Re: Pols Voice MC style
Post by: dotyue on March 26, 2017, 11:08:18 pm
I bring today the Pols Voice! I did the front view only, with the attack animation.

animation does remind me of the majoras mask chuchu i made some time ago.

but its badass looking :D
maybe you want to take a look at a patamon sprite... (taunt 4 http://i.imgur.com/gmHzS.png )

Thanks! I based the animation on the zol animation. I remeber your MM chuchu, it was awesome!

The patamon sprite will be useful to base the movement of the ears of the zol for the side view, thanks!

you might want to look at some other digimon sprites... i looked for the theeth ( since there are top down sprites as well for digimon )
Title: Re: SpritingBrad´s sprites
Post by: Rayo on March 28, 2017, 01:58:20 am
Looks cool. Looks similar to a Rabitefrom Sword of mana.  :)
Have a look at this if you do the sideview: Rabite(Open mouth) (https://www.spriters-resource.com/game_boy_advance/som/sheet/6244/), Rabite(Jump) (https://www.spriters-resource.com/game_boy_advance/som/sheet/6174//)
Title: [Spoilers?] MC Malice (Breath of the Wild)
Post by: SpritingBrad on April 09, 2017, 04:45:06 pm
I´m not sure if this is considered spoilers since it has nothing to do with the story and its just an obstacle/trap.
I attempted to make the Malice goop that covers parts of Hyrule into MC style.
How this works is that it is in several layers. The purple goop goes underneath the black outline. The green background is then made transparent. Then place it on top of your map.

I still have to make those malice spikes, eyeballs and mouths.
What do you think of this?
Title: Re: [Spoilers?] MC Malice (Breath of the Wild)
Post by: gaiamegu64 on April 09, 2017, 07:48:44 pm
I´m not sure if this is considered spoilers since it has nothing to do with the story and its just an obstacle/trap.
I attempted to make the Malice goop that covers parts of Hyrule into MC style.
How this works is that it is in several layers. The purple goop goes underneath the black outline. The green background is then made transparent. Then place it on top of your map.

I still have to make those malice spikes, eyeballs and mouths.
What do you think of this?

Very nice! and it has multiple uses! BTW you ever thought of making slopes or hills?
Title: Re: [Spoilers?] MC Malice (Breath of the Wild)
Post by: SpritingBrad on April 09, 2017, 10:00:57 pm
I´m not sure if this is considered spoilers since it has nothing to do with the story and its just an obstacle/trap.
I attempted to make the Malice goop that covers parts of Hyrule into MC style.
How this works is that it is in several layers. The purple goop goes underneath the black outline. The green background is then made transparent. Then place it on top of your map.

I still have to make those malice spikes, eyeballs and mouths.
What do you think of this?

Very nice! and it has multiple uses! BTW you ever thought of making slopes or hills?

Thanks! Actually I have, I want to make hills and slopes in various perspectives to be able to make a varied landcape, or just for one type of perspective. But its quite difficult xD
Title: Re: [Spoilers?] MC Malice (Breath of the Wild)
Post by: gaiamegu64 on April 09, 2017, 11:24:23 pm
I´m not sure if this is considered spoilers since it has nothing to do with the story and its just an obstacle/trap.
I attempted to make the Malice goop that covers parts of Hyrule into MC style.
How this works is that it is in several layers. The purple goop goes underneath the black outline. The green background is then made transparent. Then place it on top of your map.

I still have to make those malice spikes, eyeballs and mouths.
What do you think of this?

Very nice! and it has multiple uses! BTW you ever thought of making slopes or hills?

Thanks! Actually I have, I want to make hills and slopes in various perspectives to be able to make a varied landcape, or just for one type of perspective. But its quite difficult xD

How so? i imagine it'd be for the grass, but not the walls
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on April 10, 2017, 02:09:20 am
Except there are plenty of walls that have the goop on it, in BotW. And in MC there are some climbable walls, so...
Title: Re: SpritingBrad´s sprites
Post by: dotyue on April 10, 2017, 07:40:32 am
nice idea! i can't wait to see, if that method works with the walls or if you find another solution
Title: [Spoilers?] MC Malice Pillars (Breath of the Wild)
Post by: SpritingBrad on April 10, 2017, 09:35:18 pm
The tiles work for the walls too, that saves time! XD
I also made some of those Malice Pillars, that sprout out of the goop.
Title: Re: SpritingBrad´s sprites
Post by: dotyue on April 10, 2017, 10:38:12 pm
nice looking =)
when i remember right, only the head spawners and the eyes are left for that gooey stuff ^^
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on April 10, 2017, 11:57:48 pm
nice looking =)
when i remember right, only the head spawners and the eyes are left for that gooey stuff ^^

Thanks!
Yes, the Malice eyes and the Malice mouths are next :3
Title: [Spoilers?] MC Malice Eyes (Breath of the Wild)
Post by: SpritingBrad on April 11, 2017, 10:24:04 am
I did the eyes. The only thing that´s left is the mouth.
Title: [Spoilers?] MC Fireblight Ganon (Breath of the Wild)
Post by: SpritingBrad on April 15, 2017, 08:08:47 pm
I made another sprite from BotW today. This is one of the bosses. Fireblight Ganon. Enjoy.
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on April 15, 2017, 11:40:08 pm
Nice. you ever thought of submitting these to the Spriters Resource?
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on April 16, 2017, 12:42:15 am
Nice. you ever thought of submitting these to the Spriters Resource?

Nah, I'm loyal to ZFGC xD
Title: [Spoilers] BotW Daruk and Mipha MC style
Post by: SpritingBrad on April 18, 2017, 05:35:12 pm
I just love this game so much, specially its characters. I made two of the champions, the Goron Champion Daruk and the Zora Champion Mipha.
I´m really happy with the results, specially with Daruk :3
Title: Re: SpritingBrad´s sprites
Post by: Leduardo on April 19, 2017, 04:31:33 pm
I'm playing the game too.

I love your sprites.

Congratulations.
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on April 19, 2017, 08:24:48 pm
I'm playing the game too.

I love your sprites.

Congratulations.

Thanks! Really appreciate it!
Title: [Spoilers] BotW Revali MC style
Post by: SpritingBrad on April 21, 2017, 11:58:39 am
Another champion done!
Title: BotW Guardian Stalker MC Style
Post by: SpritingBrad on April 27, 2017, 10:59:03 pm
I improved the Guardian Stalker head I made a while back. I may attempt to do the body in the future :3
Title: BotW Guardian Stalker MC Style - Head Views
Post by: SpritingBrad on April 28, 2017, 10:03:36 am
I improved the front view just a little, and made other views, which still need those things on top of the head.
Any thoughts on this?
Title: BotW Guardian Stalker MC Style - Upper Body
Post by: SpritingBrad on April 28, 2017, 02:13:02 pm
I made the upper body of the Guardian Stalker. It´s starting to take form! :D
The body will rotate too, I just didn´t have the time to animate it.

The blue and black strip there is animated, they are the gears under the head of the guardian.

I´m having difficulty spriting the things on top of the guardian´s head in the other directions for some reason. I need help with that.

The only things remaining are the lower part of the body and the legs. The lower part of the body will rotate too, and the legs will come out of them. I think I will make the legs with separate pieces, like Gleerok.
Title: Re: SpritingBrad´s sprites
Post by: MG-Zero on April 28, 2017, 04:08:27 pm
goddamn dude, you're gonna sprite the whole game before you know it xD
Title: BotW Guardian Stalker MC Style - Lower Body
Post by: SpritingBrad on April 28, 2017, 04:17:46 pm
goddamn dude, you're gonna sprite the whole game before you know it xD

That´s the plan XD

I made the lower body of the Guardian Stalker.
Title: BotW Guardian Stalker MC Style - Legs
Post by: SpritingBrad on April 29, 2017, 10:39:37 am
I completed the Guardian Stalker!
All that´s left is the top things on the guardian´s head and its done!

The legs have individual pieces that go together in-game like Minish Cap´s Gleerok.

Edit: I made the laser he shoots
Title: Re: SpritingBrad´s sprites
Post by: Martijn dh on April 29, 2017, 01:54:15 pm
That looks awesome!
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on April 29, 2017, 02:09:04 pm
That looks awesome!
Thanks! :D
Title: BotW Guardian Stalker MC Style - Complete
Post by: SpritingBrad on April 29, 2017, 04:54:01 pm
I finally finished this! After a lot of trial and error I managed to make the top things on the head.

I´m really happy with the end result, and if anyone plans to make a 2D breath of the Wild, they are welcome to use it, just give credit XD
Title: Re: SpritingBrad´s sprites
Post by: shadowlink360 on April 30, 2017, 09:15:19 pm
please tell me your making this a game?
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on April 30, 2017, 10:53:40 pm
please tell me your making this a game?
Sadly no... the sprites I make are just for fun, but if anyone wants to make a game using my sprites they are free to do so (Just give credit :3)

Title: Re: SpritingBrad´s sprites
Post by: shadowlink360 on May 01, 2017, 12:45:45 am
gotcha
Title: BotW Zoras MC style
Post by: SpritingBrad on May 08, 2017, 07:07:34 pm
I attempted to recreate the Zoras from BotW. I edited King Mob´s Twilight Princess Zora sprite to make this, since they look quite similar.

I remade Mipha, made Sydon and other Zoras, both male and female. They are not animated, yet.
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on May 09, 2017, 02:09:40 am
Very nice!
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on May 10, 2017, 03:53:21 am
W-o-w, Brad! That looks amazing!

...I definitely want to use that sheet...
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on May 10, 2017, 11:32:21 am
W-o-w, Brad! That looks amazing!

...I definitely want to use that sheet...

Thanks! :D Go ahead and use them, just give credit ;)
Title: OoT Zora Minish cap style
Post by: SpritingBrad on May 11, 2017, 05:02:12 pm
Since I´ve been editing the zoras, I tried to make the OoT variant. I think it looks nice, what do you think?
Title: Re: SpritingBrad´s sprites
Post by: Leduardo on May 11, 2017, 08:47:47 pm
The last one is the best.
 ;)
Title: BotW keese MC style (four directions + elemental types)
Post by: SpritingBrad on May 14, 2017, 11:14:38 am
Back again with another BotW sprite. This time I made the Keese  from Botw. I gave the MC keese detail and tweaked it a bit, and I then decided to make other directions for the keese, since Minish Cap only had the front view.

Anyway, what do you think of this?
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on May 18, 2017, 12:12:29 am
Very nice!

btw you ever thought of doing JRPG enemies in this style?
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on June 10, 2017, 10:49:36 pm
Ooo, you gotta make them BotW Zora kids, also... Please?
Title: Zora Child and Muzu (BotW) MC Style
Post by: SpritingBrad on June 11, 2017, 06:05:51 am
Ooo, you gotta make them BotW Zora kids, also... Please?

Haha sure! They are adorable! I'll work on them when I can. :)

EDIT: done!
EDIT 2: I did Muzu too
Title: Re: Zora Child and Muzu (BotW) MC Style
Post by: Miles07 on June 12, 2017, 01:23:02 am
Ooo, you gotta make them BotW Zora kids, also... Please?

Haha sure! They are adorable! I'll work on them when I can. :)

EDIT: done!
EDIT 2: I did Muzu too

D'awww! I'll say this forever; the kids of each race in BotW are the most adorable things ever in the series. (Not the Hylian kids, though.)
Title: MC style BotW Pine Trees.
Post by: SpritingBrad on June 18, 2017, 04:14:21 pm
D'awww! I'll say this forever; the kids of each race in BotW are the most adorable things ever in the series. (Not the Hylian kids, though.)

I know right? The Rito kids are too cute too! Specially Teba´s son, with the spiky feathers, He is so cute. I also feel really bad then I accidentally (or intentionally) attacked him and he just started to weep.

So! I did some pine trees! I did different types of pine trees to see how they would look.
The trunk can be customized to anyone´s liking, tall, short, with branches, without, branches with leafs, others without...
I also made the trunks being cut from different directions, like in BotW, where depending on where you cut it, the tree falls on that direction.
The trunk is the same for all trees, except palm trees.

As for the leafs, I tried several things for them, and ended up with 3 examples.
1 is based on the leafs and branches from the MC´s pine tree.
2 has the same trunk but the leafs are custom made.
3 is a mix between the two.
I personally like 1 the most, though 2 looks mote like BotW pine trees. Which one do you guys like the most? 1, 2 or 3?
Title: Re: SpritingBrad´s sprites
Post by: Martijn dh on June 18, 2017, 05:09:27 pm
It's sprites likes these that make me wish I choose for the MC instead of Lttp style for my game. These look great and very flexible!
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on June 18, 2017, 07:01:13 pm
It's sprites likes these that make me wish I choose for the MC instead of Lttp style for my game. These look great and very flexible!

Alttp style is still a very beautiful style. MC is just more detailed. :P And Thanks!
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on June 19, 2017, 03:16:36 am
How owuld you bunch the trees up to create a forest?
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on June 19, 2017, 08:55:31 am
How owuld you bunch the trees up to create a forest?

You mean as in Minish Cap where they merge together? Simple, they don´t. In real life trees don´t merge like that, they grow independently with space between one another. Same thing applies here. It allows Link to move around between them and for mushrooms, paths, rocks, and even enemies and animals to be in between the trees. Have a look at the quick example I made so you can see what I mean.
Title: Pine tree canopy
Post by: SpritingBrad on June 19, 2017, 02:12:11 pm
I´m trying to see which canopy looks best for the pine tree. I tried to add large branches to the pine trees, but its fills up a lot of space. What do you guys think of this? Do you think the one without the extra leafs looks better or the one with the extra leafs? if you don´t like any of them, do you have an idea of how it could be improved?
Title: Re: SpritingBrad´s sprites
Post by: LorentzChronon on June 19, 2017, 04:08:11 pm
I think there might be a little too much space between the nodes from the top of the tree and the node below it. I've attached a pine tree for example, hoping it might help.

Title: MC style BotW Pine Tree improvement
Post by: SpritingBrad on June 20, 2017, 08:46:00 am
I think there might be a little too much space between the nodes from the top of the tree and the node below it. I've attached a pine tree for example, hoping it might help.

Thanks for the advice man! Any better?
Title: Re: SpritingBrad´s sprites
Post by: Max. on June 20, 2017, 11:08:30 am
Cool project, man. Getting closer and closer to looking like a pine tree.

One thing that still looks odd is how thick the trunk is right up at the top. Maybe if you filled in where you can see the trunk at the top with more branches, you couldn't tell.

Another thing that might help you- the trees in Minish Cap look a lot more like fir or spruce (or honestly hemlock based on where they're growing) trees than pines. If you're basing yours off parts of the trees from Minish Cap, probably use a fir or spruce as a reference instead of a pine. The difference isn't huge, but it might be helpful.
Title: Re: MC style BotW Pine Tree improvement
Post by: LorentzChronon on June 20, 2017, 06:28:47 pm
I think there might be a little too much space between the nodes from the top of the tree and the node below it. I've attached a pine tree for example, hoping it might help.

Thanks for the advice man! Any better?

This is definitely an improvement! Very awesome.
Title: BotW Guardian Turret MC Style (and Guardian Stalker update)
Post by: SpritingBrad on June 20, 2017, 08:04:03 pm
Cool project, man. Getting closer and closer to looking like a pine tree.

One thing that still looks odd is how thick the trunk is right up at the top. Maybe if you filled in where you can see the trunk at the top with more branches, you couldn't tell.

Another thing that might help you- the trees in Minish Cap look a lot more like fir or spruce (or honestly hemlock based on where they're growing) trees than pines. If you're basing yours off parts of the trees from Minish Cap, probably use a fir or spruce as a reference instead of a pine. The difference isn't huge, but it might be helpful.

Thanks for the tips Max, I will see what I can do :)

I think there might be a little too much space between the nodes from the top of the tree and the node below it. I've attached a pine tree for example, hoping it might help.

Thanks for the advice man! Any better?

This is definitely an improvement! Very awesome.

Thanks man!

So I began working on another guardian type. This time its the Guardian Turret. I also modified my Guardian stalker a little bit, mainly the eye and patterns on the heads while turning.

The turret will be a lot of work, considering that the head has to turn and the things on the sides rotate while its spins too. Also the body is different from the stalker´s body, so it can´t be reused.
Title: Malice Smoke Ganon MC style attempt
Post by: SpritingBrad on June 22, 2017, 07:37:54 pm
I attempted to sprite the smoke Ganon that flies around Hyrule castle. I just placed smoke particles ontop of others :P
This is more of a test to see how it could be done.
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on June 24, 2017, 03:07:29 pm
:V
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on June 24, 2017, 08:20:37 pm
:V

LMAO XD
Title: King Mob´s MC Epona Recreation
Post by: SpritingBrad on June 27, 2017, 06:21:39 pm
I am trying my very best to recreate King Mob´s Minish Cap Epona from his 2008 project The Legend of Zelda: The Shadowgazer.
How I´m doing this is surprisingly quite simple. I have print-screened every frame of Epona seen on one of his videos. Then, I resized them roughly to the size of the ones shown on the screenshots on his main page. I then proceed to clean the sprite to the best of my ability.
I have only recreated the side running animation, and I think I have done a pretty good job with it.

When I have the others done, i will post them. Sadly, the video doesn´t show EVERY movement Epona makes in every single pose, just the ones in the attachment below. I will only RECREATE the sprites seen, and maybe create new ones. If anyone wants to expand the sheet they are welcome to do so.

EDIT: I have added a custom move to Epona. She is now rearing.
Title: Re: SpritingBrad´s sprites
Post by: Miles07 on June 28, 2017, 03:06:33 am
That looks REALLY good, actually.

Though... maybe getting the assets straight from King Mob himself would be easier? If he still has them, that is...
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on June 28, 2017, 09:30:24 am
That looks REALLY good, actually.

Though... maybe getting the assets straight from King Mob himself would be easier? If he still has them, that is...

But how do you contact him though?
Title: Re: SpritingBrad´s sprites
Post by: Zhello on June 28, 2017, 10:55:33 pm
That looks REALLY good, actually.

Though... maybe getting the assets straight from King Mob himself would be easier? If he still has them, that is...

But how do you contact him though?

There is literally no way of contacting him at all; he's moved on to other things since he stop making the Shadowgazer, since then has stopped contact with people of the fan game community, this also goes for MiT, but MiT left everything on his own website for anyone to use. If you are lucky, there has been some sprites and tilesets made by him somewhere on the internet. A while back I found tilesets by him on some sprite website when I was looking for lttp sprites and tiles.
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on June 29, 2017, 02:39:56 pm
That looks REALLY good, actually.

Though... maybe getting the assets straight from King Mob himself would be easier? If he still has them, that is...


But how do you contact him though?

There is literally no way of contacting him at all; he's moved on to other things since he stop making the Shadowgazer, since then has stopped contact with people of the fan game community, this also goes for MiT, but MiT left everything on his own website for anyone to use. If you are lucky, there has been some sprites and tilesets made by him somewhere on the internet. A while back I found tilesets by him on some sprite website when I was looking for lttp sprites and tiles.


Could you link the tiles and sprtes
Title: Shrine of Resurrection MC style
Post by: SpritingBrad on June 29, 2017, 04:36:28 pm
That looks REALLY good, actually.

Though... maybe getting the assets straight from King Mob himself would be easier? If he still has them, that is...

But how do you contact him though?

There is literally no way of contacting him at all; he's moved on to other things since he stop making the Shadowgazer, since then has stopped contact with people of the fan game community, this also goes for MiT, but MiT left everything on his own website for anyone to use. If you are lucky, there has been some sprites and tilesets made by him somewhere on the internet. A while back I found tilesets by him on some sprite website when I was looking for lttp sprites and tiles.

That´s a shame really... I wish he came back to the forum once again, he was a great artist.

I have done something new today. I did the Shrine of Resurrection in MC style. I was actually inspired by  this map made by Thurpok (http://thurpok.deviantart.com/art/Zelda-BOTW-Minish-Cap-style-676447913). However, this map doesn't fit any grid, nor is it accurate to the actual shrine of resurrection, but its close. I decided to make my own map with my own tiles, but I used some parts of his map, like the terminal of the Sheikah Slate and the constellation patterns on the walls. I used the same palette as my Guardian sprites, since they are made of the same tech/material.
Title: Re: SpritingBrad´s sprites
Post by: MG-Zero on June 29, 2017, 08:55:01 pm
whoa.  Dude, that's awesome!
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on June 29, 2017, 09:00:24 pm
whoa.  Dude, that's awesome!
Thanks man!
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on June 30, 2017, 01:23:09 pm
Why not use the horse sprites on spriters resource's four swords section as a base?
Title: Re: SpritingBrad´s sprites
Post by: SpritingBrad on June 30, 2017, 01:36:18 pm
Why not use the horse sprites on spriters resource's four swords section as a base?

Because its a recreation of a sprite that has already been done. All I´m doing is restoring the sprite seen on a video that is nowhere else on the internet.
Title: Re: SpritingBrad´s sprites
Post by: Zhello on June 30, 2017, 01:54:20 pm
That looks REALLY good, actually.

Though... maybe getting the assets straight from King Mob himself would be easier? If he still has them, that is...


But how do you contact him though?

There is literally no way of contacting him at all; he's moved on to other things since he stop making the Shadowgazer, since then has stopped contact with people of the fan game community, this also goes for MiT, but MiT left everything on his own website for anyone to use. If you are lucky, there has been some sprites and tilesets made by him somewhere on the internet. A while back I found tilesets by him on some sprite website when I was looking for lttp sprites and tiles.


Could you link the tiles and sprtes

I'd have to go looking for those tiles again and at the time I found them at random. I knew those tiles were for King Mob when I first saw them too.

That looks REALLY good, actually.

Though... maybe getting the assets straight from King Mob himself would be easier? If he still has them, that is...

But how do you contact him though?

There is literally no way of contacting him at all; he's moved on to other things since he stop making the Shadowgazer, since then has stopped contact with people of the fan game community, this also goes for MiT, but MiT left everything on his own website for anyone to use. If you are lucky, there has been some sprites and tilesets made by him somewhere on the internet. A while back I found tilesets by him on some sprite website when I was looking for lttp sprites and tiles.

That´s a shame really... I wish he came back to the forum once again, he was a great artist.

I have done something new today. I did the Shrine of Resurrection in MC style. I was actually inspired by  this map made by Thurpok (http://thurpok.deviantart.com/art/Zelda-BOTW-Minish-Cap-style-676447913). However, this map doesn't fit any grid, nor is it accurate to the actual shrine of resurrection, but its close. I decided to make my own map with my own tiles, but I used some parts of his map, like the terminal of the Sheikah Slate and the constellation patterns on the walls. I used the same palette as my Guardian sprites, since they are made of the same tech/material.

Yeah, if anything he could be going under a different name on Youtube somewhere. Other than that anything Shadowgazer just vanished from it. Also the people on YT claim because of Nintendo he stopped his game, which is false, the reality is he stopped making the game himself, lost motivation.
https://www.reddit.com/r/zelda/comments/wuglk/what_ever_happened_to_the_shadowgazer/


I think his website is still up, I'd have to check this again.

EDIT:

This is the last remnant anything Shadowgazer:
http://www.zfgc.com/users/kingmob/index.html
Title: Lynel MC style
Post by: SpritingBrad on July 05, 2017, 08:53:49 pm
Since I was bored, I edited KM´s Epona to make a Lynel. I also edited this lynel (https://www.spriters-resource.com/custom_edited/thelegendofzeldacustoms/sheet/86337/) to make it.
If I continue to work on Epona, I will continue to work on this, in the mean time, this is all. :3
Title: Kass and Revali MC style
Post by: SpritingBrad on July 13, 2017, 02:12:42 pm
Another Breath of the Wild sprite! I began working on Kass and made the front and side view, but they don't have clothes, and they only have arms on the side view. After I made Kass, I edited him and the Revali sprite I had done earlier and made a taller version of Revali, since the Rito are quite tall in breath of the Wild (as every other race)

EDIT: I gave Revali clothes and arms.
Title: Teba MC style
Post by: SpritingBrad on July 14, 2017, 03:01:41 pm
I made another Rito tribe member, this time Teba, the Rito Warrior. I also gave Kass arms and his accordion.
Title: Minish Cap Style Daruk (Redo)
Post by: SpritingBrad on July 21, 2017, 10:15:51 pm
I redid Daruk to be much bigger than I made him previously. Now he is huge!
Tell me what you think!
Title: Mipha and the Zora (Redo)
Post by: SpritingBrad on July 23, 2017, 02:46:03 pm
I edited the Zora heads and tried to remake the bodies that King mob made.
I also remade Mipha and the Zora child.
Title: Re: SpritingBrad´s sprites
Post by: gaiamegu64 on September 02, 2017, 08:13:05 pm
Nice!

You ever thought about doing the CDI bosses or locations?
Title: Re: SpritingBrad´s sprites
Post by: MG-Zero on September 29, 2017, 12:59:25 pm
Nice!

You ever thought about doing the CDI bosses or locations?

A question I never thought I'd see here.
Title: OoT Zora Minish Cap Style
Post by: SpritingBrad on November 12, 2017, 06:08:23 pm
Nice!

You ever thought about doing the CDI bosses or locations?

Lol! Maybe XD Who knows ;)

After seeing Leduardo's Tijo Sprite, I wanted to make the Ocarina of Time Zoras, which I attempted time and time again, and never got the good result. However, I think I made the definite version, using the color palette Leduardo used for his sprite, and mixing King Mob's Zora Sprites with leduardo's and a bit of a Goron too. The final result is this.

Tell me what do you think, and what you would improve.

EDIT: I made a nearly all of The Indigo-Go's members, and Ruto. The last member was made by Leduardo entirely, I just put him these for comparison.
Title: OoT Zora Minish Cap Style (Side view head only)
Post by: SpritingBrad on November 14, 2017, 07:58:13 pm
I did the side view of the Generic Zora from OoT (Which I think looks even better than the front view tight butthole. I LOVE IT xD!)

Tell me what you think :D!
Title: OoT Zora Minish Cap Style (SIDE VIEWS DONE!)
Post by: SpritingBrad on November 16, 2017, 05:07:20 pm
I fixed the face of the zora and added a shine to all the heads.
I also finished the side view, using King Mob's Zora and the Goron for the arms.

Contact Us | Legal | Advertise Here
2013 © ZFGC, All Rights Reserved