Hello Guest, please login or register.
Did you miss your activation email?
Login with username, password and session length.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - SpritingBrad

Pages: [1] 2 3 ... 49
1
Graphics / King Mob´s MC Epona Recreation
« on: Yesterday at 06:21:39 pm »
I am trying my very best to recreate King Mob´s Minish Cap Epona from his 2008 project The Legend of Zelda: The Shadowgazer.
How I´m doing this is surprisingly quite simple. I have print-screened every frame of Epona seen on one of his videos. Then, I resized them roughly to the size of the ones shown on the screenshots on his main page. I then proceed to clean the sprite to the best of my ability.
I have only recreated the side running animation, and I think I have done a pretty good job with it.

When I have the others done, i will post them. Sadly, the video doesn´t show EVERY movement Epona makes in every single pose, just the ones in the attachment below. I will only RECREATE the sprites seen, and maybe create new ones. If anyone wants to expand the sheet they are welcome to do so.

EDIT: I have added a custom move to Epona. She is now rearing.

3
Graphics / Malice Smoke Ganon MC style attempt
« on: June 22, 2017, 07:37:54 pm »
I attempted to sprite the smoke Ganon that flies around Hyrule castle. I just placed smoke particles ontop of others :P
This is more of a test to see how it could be done.

4
Cool project, man. Getting closer and closer to looking like a pine tree.

One thing that still looks odd is how thick the trunk is right up at the top. Maybe if you filled in where you can see the trunk at the top with more branches, you couldn't tell.

Another thing that might help you- the trees in Minish Cap look a lot more like fir or spruce (or honestly hemlock based on where they're growing) trees than pines. If you're basing yours off parts of the trees from Minish Cap, probably use a fir or spruce as a reference instead of a pine. The difference isn't huge, but it might be helpful.

Thanks for the tips Max, I will see what I can do :)

I think there might be a little too much space between the nodes from the top of the tree and the node below it. I've attached a pine tree for example, hoping it might help.

Thanks for the advice man! Any better?

This is definitely an improvement! Very awesome.

Thanks man!

So I began working on another guardian type. This time its the Guardian Turret. I also modified my Guardian stalker a little bit, mainly the eye and patterns on the heads while turning.

The turret will be a lot of work, considering that the head has to turn and the things on the sides rotate while its spins too. Also the body is different from the stalker´s body, so it can´t be reused.

5
Graphics / MC style BotW Pine Tree improvement
« on: June 20, 2017, 08:46:00 am »
I think there might be a little too much space between the nodes from the top of the tree and the node below it. I've attached a pine tree for example, hoping it might help.

Thanks for the advice man! Any better?

6
Graphics / Pine tree canopy
« on: June 19, 2017, 02:12:11 pm »
I´m trying to see which canopy looks best for the pine tree. I tried to add large branches to the pine trees, but its fills up a lot of space. What do you guys think of this? Do you think the one without the extra leafs looks better or the one with the extra leafs? if you don´t like any of them, do you have an idea of how it could be improved?

7
Graphics / Re: SpritingBrad´s sprites
« on: June 19, 2017, 08:55:31 am »
How owuld you bunch the trees up to create a forest?

You mean as in Minish Cap where they merge together? Simple, they don´t. In real life trees don´t merge like that, they grow independently with space between one another. Same thing applies here. It allows Link to move around between them and for mushrooms, paths, rocks, and even enemies and animals to be in between the trees. Have a look at the quick example I made so you can see what I mean.

8
Graphics / Re: SpritingBrad´s sprites
« on: June 18, 2017, 07:01:13 pm »
It's sprites likes these that make me wish I choose for the MC instead of Lttp style for my game. These look great and very flexible!

Alttp style is still a very beautiful style. MC is just more detailed. :P And Thanks!

9
Graphics / MC style BotW Pine Trees.
« on: June 18, 2017, 04:14:21 pm »
D'awww! I'll say this forever; the kids of each race in BotW are the most adorable things ever in the series. (Not the Hylian kids, though.)

I know right? The Rito kids are too cute too! Specially Teba´s son, with the spiky feathers, He is so cute. I also feel really bad then I accidentally (or intentionally) attacked him and he just started to weep.

So! I did some pine trees! I did different types of pine trees to see how they would look.
The trunk can be customized to anyone´s liking, tall, short, with branches, without, branches with leafs, others without...
I also made the trunks being cut from different directions, like in BotW, where depending on where you cut it, the tree falls on that direction.
The trunk is the same for all trees, except palm trees.

As for the leafs, I tried several things for them, and ended up with 3 examples.
1 is based on the leafs and branches from the MC´s pine tree.
2 has the same trunk but the leafs are custom made.
3 is a mix between the two.
I personally like 1 the most, though 2 looks mote like BotW pine trees. Which one do you guys like the most? 1, 2 or 3?

10
Graphics / Zora Child and Muzu (BotW) MC Style
« on: June 11, 2017, 06:05:51 am »
Ooo, you gotta make them BotW Zora kids, also... Please?

Haha sure! They are adorable! I'll work on them when I can. :)

EDIT: done!
EDIT 2: I did Muzu too

11
Graphics / BotW keese MC style (four directions + elemental types)
« on: May 14, 2017, 11:14:38 am »
Back again with another BotW sprite. This time I made the Keese  from Botw. I gave the MC keese detail and tweaked it a bit, and I then decided to make other directions for the keese, since Minish Cap only had the front view.

Anyway, what do you think of this?

12
Graphics / OoT Zora Minish cap style
« on: May 11, 2017, 05:02:12 pm »
Since I´ve been editing the zoras, I tried to make the OoT variant. I think it looks nice, what do you think?

13
Graphics / Re: SpritingBrad´s sprites
« on: May 10, 2017, 11:32:21 am »
W-o-w, Brad! That looks amazing!

...I definitely want to use that sheet...

Thanks! :D Go ahead and use them, just give credit ;)

14
Graphics / BotW Zoras MC style
« on: May 08, 2017, 07:07:34 pm »
I attempted to recreate the Zoras from BotW. I edited King Mob´s Twilight Princess Zora sprite to make this, since they look quite similar.

I remade Mipha, made Sydon and other Zoras, both male and female. They are not animated, yet.

15
Graphics / Re: SpritingBrad´s sprites
« on: April 30, 2017, 10:53:40 pm »
please tell me your making this a game?
Sadly no... the sprites I make are just for fun, but if anyone wants to make a game using my sprites they are free to do so (Just give credit :3)


16
Graphics / BotW Guardian Stalker MC Style - Complete
« on: April 29, 2017, 04:54:01 pm »
I finally finished this! After a lot of trial and error I managed to make the top things on the head.

I´m really happy with the end result, and if anyone plans to make a 2D breath of the Wild, they are welcome to use it, just give credit XD

17
Graphics / Re: SpritingBrad´s sprites
« on: April 29, 2017, 02:09:04 pm »

18
Graphics / BotW Guardian Stalker MC Style - Legs
« on: April 29, 2017, 10:39:37 am »
I completed the Guardian Stalker!
All that´s left is the top things on the guardian´s head and its done!

The legs have individual pieces that go together in-game like Minish Cap´s Gleerok.

Edit: I made the laser he shoots

19
Graphics / BotW Guardian Stalker MC Style - Lower Body
« on: April 28, 2017, 04:17:46 pm »
goddamn dude, you're gonna sprite the whole game before you know it xD

That´s the plan XD

I made the lower body of the Guardian Stalker.

20
Graphics / BotW Guardian Stalker MC Style - Upper Body
« on: April 28, 2017, 02:13:02 pm »
I made the upper body of the Guardian Stalker. It´s starting to take form! :D
The body will rotate too, I just didn´t have the time to animate it.

The blue and black strip there is animated, they are the gears under the head of the guardian.

I´m having difficulty spriting the things on top of the guardian´s head in the other directions for some reason. I need help with that.

The only things remaining are the lower part of the body and the legs. The lower part of the body will rotate too, and the legs will come out of them. I think I will make the legs with separate pieces, like Gleerok.

Pages: [1] 2 3 ... 49

Contact Us | Legal | Advertise Here
2013 © ZFGC, All Rights Reserved



Page created in 0.024 seconds with 14 queries.